Abstract:Methods to prevent collisions between people to avoid traffic accidents are receiving significant attention. To measure the position in the non-line-of-sight (NLOS) area, which cannot be directly visually recognized, position-measuring methods use wireless-communication-type GPS and propagation characteristics of radio signals, such as received signal strength indication (RSSI). However, conventional position estimation methods using RSSI require multiple receivers, which decreases the position estimation accuracy, owing to the presence of surrounding buildings. This study proposes a system to solve this challenge using a receiver and position estimation method based on RSSI MAP simulation and particle filter. Moreover, this study utilizes BLE peripheral/central functions capable of advertising as the transmitter/receiver. By using the advertising radio waves, our method provides a framework for estimating the position of unspecified transmitters. The effectiveness of the proposed system is evaluated in this study through simulations and experiments in actual environments. We obtained an error average of the distance to be 1.6 m from the simulations, which shows the precision of the proposed method. In the actual environment, the proposed method showed an error average of the distance to be 3.3 m. Furthermore, we evaluated the accuracy of the proposed method when both the transmitter and receiver are in motion, which can be considered as a moving person in the outdoor NLOS area. The result shows an error of 4.5 m. Consequently, we concluded that the accuracy was comparable when the transmitter is stationary and when it is moving. Compared with conventional path loss, the model can measure distances of 3 m to 10 m, whereas the proposed method can estimate the "position" with the same accuracy in an outdoor environment. In addition, it can be expected to be used as a collision avoidance system that confirms the presence of strangers in the NLOS area.

A hybrid TDoA/RSSI model for mitigating NLOS errors in FMCW based indoor positioning systems

An Enhanced TDoA Approach Handling Multipath Interference in Wi-Fi Based Indoor Localization Systems

The NLOS error mitigation joint algorithm in hybrid positioning system combining DTMB and GPS

An Adaptive IMU/UWB Fusion Method for NLOS Indoor Positioning and Navigation

A RSSI/PDR-Based Probabilistic Position Selection Algorithm with NLOS Identification for Indoor Localisation

A single-site positioning method based on TOA and DOA estimation using virtual stations in NLOS environment

An Efficient Cooperative Positioning Scheme in Non-Line-of-Sight Environments

A TOA/AOA hybrid location algorithm based on NLOS

NLOS error mitigation in TOA systems

A Novel NLOS Error Compensation Method Based IMU for UWB Indoor Positioning System

TDOA Based Indoor Positioning with NLOS Identification by Machine Learning

Rss-Based Ranging by Leveraging Frequency Diversity to Distinguish the Multiple Radio Paths

Resonant Beam Enabled DoA Estimation in Passive Positioning System

Single-Site 3-D Positioning in Multipath Environments Using DOA-Delay Measurements

Human-to-Human Position Estimation System Using RSSI in Outdoor Environment

A Wi-Fi-Based Wireless Indoor Position Sensing System with Multipath Interference Mitigation

Survey on NLOS Identification and Error Mitigation for UWB Indoor Positioning

NLOS mitigation and ranging accuracy for building indoor positioning system in UWB using commercial radio modules

Intelligent Reflecting Surface-Assisted NLOS Sensing With OFDM Signals

On distinguishing the multiple radio paths in RSS-based ranging

A Majorization-Minimization Algorithm for Hybrid TOA-RSS based localization in NLOS Environment