Abstract:Extensive numerical analyses and experimental tests have shown that while major regions of magnetic cores in electromagnetic devices, such as transformers and rotating electric machines, are dominated by the alternating magnetic fields, the rotating magnetic fields exist in the corner joints of multi-phase transformers and the yoke area behind the teeth of rotating electric machines. These magnetic fields cause core losses due to hysteresis and eddy currents, mechanical vibration and acoustic noises due to magnetostriction. Many studies have been reported in the literature on alternating and rotational core losses and alternating magnetostriction, but not so much on rotational magnetostriction, especially in non-oriented (NO) silicon steel sheets. The vibration and noise caused by rotational magnetostriction are much higher than those caused by alternating magnetostriction. This paper reports the development of a magnetostriction measurement system consisting of a 2D symmetrical single sheet tester (SST) and resistance strain gauges. The selection considerations of resistance strain gauges are summarized. The alternating and rotational magnetostriction characteristics of a NO silicon steel, B35A300 (0.35 mm), are measured. Because the rotating magnetic field in the stator is not always ideally circular but more often elliptical, the magnetostriction under elliptical magnetizations with different axis ratios is also measured. The magnetostriction anisotropy of the NO steel sheet is observed and analyzed. The elongation and contraction under alternating, circular and elliptical rotating magnetizations with different axis ratios are discussed. The results can provide data support for calculating and designing multi-phase transformers and rotating electric machines under different types of magnetizations. The research can provide theoretical and practical guidance for mitigating mechanical vibration and acoustic noise caused by magnetostriction.

Magnetic properties of a non-oriented electrical steel at cryogenic temperature for rapid-cycling accelerator superconducting magnets

A Persistent-Mode 0.5t Solid-Nitrogen-Cooled Mgb2 Magnet for Mri

A Persistent-Mode 0.5 T Solid-Nitrogen-cooled MgB2 Magnet for MRI.

Low temperature physical properties of Co-35Ni-20Mo-10Cr alloy MP35N

Mechanical Characterization of Low-Carbon Steels for High-Field Accelerator Magnets: Application to Nb$_{3}$Sn Low-$\beta$ Quadrupole MQXF

Thermal analysis of a 3 T cryogen-free superconducting magnet for electromagnetic property measurement system

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Magnetic Performance Improvement Caused by Tensile Stress in Equivalent Iron Core Fabricated by High-Strength Non-Oriented Electrical Steel

Measurement of Alternating and Rotational Magnetostrictions of Non-oriented Silicon Steel Sheets

Research on Magnetic Properties of Nd(Pr)FeB Magnet for Cryogenic Permanent-Magnet Undulator of SSRF

Design of a 30-K/4-kj HTS Magnet Cryocooled with Solid Nitrogen

Superstrength permanent magnets with iron-based superconductors by data- and researcher-driven process design

Properties of various sintered rare earth-cobalt permanent magnets between -60° and +200°C

Magnetic property measurement and analysis of high-frequency soft magnetic materials under non-sinusoidal excitation considering temperature effect

Development of a Superconducting Magnet for High Magnetic Force Application

AC loss and thermal analysis of a curved DCT super-conducting magnet for carbon ion therapy

Experimental Study of a Solid-Nitrogen-Cooled HTS Magnet for Superconducting Linear Synchronous Motors

Magnetization loss of no-insulation coil for an electrodynamic suspension system

A Low Temperature Functioning CoFeB/MgO Based Perpendicular Magnetic Tunnel Junction for Cryogenic Nonvolatile Random Access Memory

Variable Temperature Thermal Conductivity and Conductance Measurements Using a Gifford-McMahon Cryocooler

An on-board 2G HTS magnets system with cooling-power-free and persistent-current operation for ultrahigh speed superconducting maglevs