Abstract:Fluoride (F−) pollution in groundwater is an important environmental issue and capacitive deionization (CDI) holds promise for defluorination at moderate concentrations (e.g., 200−1,000mgL−1). However, existing electrodes suffer from the overlap of electrical-double-layer (EDL) and severe co-ion effects at low (e.g., <200mgL−1) and high sodium fluoride (NaF) concentrations (e.g., >1,000mgL−1), respectively, exhibiting poor salt adsorption capacity (SAC). Hence, a three-layer structured electrode, “membrane/carbon nanotube (CNT)/activated carbon (AC)” (CNT-MCE), was prepared through electrospinning CNT onto AC, followed by a polymer membrane coating. Compared to AC and membrane coated electrode, CNT-MCE with mesopore-dominated structure prevented EDL overlap, achieving a higher SAC of 40.8mgg−1 at 100mgL−1 NaF. At 1,500mgL−1 NaF, the positively charged CNT-MCE exhibited an improved SAC of 58.8mgg−1 by inhibiting co-ion effects. Meanwhile, CNT-MCE consistently demonstrated superb SACs at 200−800mgL−1 NaF and maintained excellent stability over a wide concentration gradient by inhibiting severe oxidation. Notably, CNT-MCE successfully decreased the F− concentration in simulated groundwater from 3.4 to 1.1mgL−1. Overall, our work provides an efficient strategy of electrode design to broaden the applicability of CDI for groundwater defluorination over a wide concentration gradient. Environmental Implication Exposing to groundwater with excessive fluoride will lead to serious damage on the ecosystem and human health. A novel three-layer structured electrode was prepared and used as anode in capacitive deionization for efficient fluoride removal from groundwater. With mesopore-dominated structure, positively charged surface and good conductivity, the prepared electrode could promote the formation of electrical double layer in the solution with low concentration of fluoride and inhibit co-ion repulsion effect in the solution with high concentration of fluoride, which exhibited the superb defluorination capacities over wide concentration gradients. Additionally, the prepared electrode showed outstanding defluorination stability by inhibiting serious oxidation.

Flexible self-supporting electrode for high removal performance of arsenic by capacitive deionization

Effective removal of trace arsenic from groundwater by capacitive deionization

Electrospun Composites Made of Reduced Graphene Oxide and Activated Carbon Nanofibers for Capacitive Deionization

Functional Graphene Nanocomposite As an Electrode for the Capacitive Removal of FeCl3 from Water

Enhanced capacitive deionization of a low-concentration brackish water with protonated carbon nitride-decorated graphene oxide electrode

3D interconnected porous graphene architecture as a high-performance capacitive deionization electrode

Mesopore-enhanced graphene electrodes with modified hydrophilicity for ultrahigh capacitive deionization

Mesoporous Generation-Inspired Ultrahigh Capacitive Deionization Performance by Sono-Assembled Activated Carbon/Inter-Connected Graphene Network Architecture

Hierarchical nickel cobaltite nanoneedle arrays armored flexible electrospinning carbon nanofibers membrane for electrochemical deionization

Ultrahigh Performance of Novel Capacitive Deionization Electrodes based on A Three-Dimensional Graphene Architecture with Nanopores

Graphene-Carbon 2d Heterostructures With Hierarchically-Porous P,N-Doped Layered Architecture For Capacitive Deionization

Reduced graphene oxide modified porous alumina substrate as an electrode material for efficient capacitive deionization

Anion-kinetics-selective Graphene Anode and Cation-Energy-selective MXene Cathode for High-Performance Capacitive Deionization

Nitrogen-Doped Graphene Composites As Efficient Electrodes with Enhanced Capacitive Deionization Performance

Bio-composite nanoarchitectonics for graphene tofu as useful source material for capacitive deionization

Graphene Oxide-Tuned MoS2 with an Expanded Interlayer for Efficient Hybrid Capacitive Deionization

Electro-assisted Adsorption of Cs(I) and Co(II) from Aqueous Solution by Capacitive Deionization with Activated Carbon Cloth/graphene Oxide Composite Electrode.

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Metal cobalt dot-doped carbon structures with specific exposure surfaces for high-performance capacitive deionization

Moderately oxidized graphene–carbon nanotubes hybrid for high performance capacitive deionization

Efficient groundwater defluorination over a wide concentration gradient through capacitive deionization with a three-layer structured membrane coating electrode