Abstract:Laser powder bed fusion (LPBF) additive manufacturing of zinc (Zn) offers promising advantages for biodegradable metal bone implants, including tailorable microstructures, controllable porous structures, and appropriate degradation rates. However, the layer-by-layer construction during LPBF often leads to microstructural and performance anisotropy within metallic materials. In this work, the anisotropic mechanical and degradation properties of pure Zn processed using LPBF were comprehensively investigated for the first time. Specifically, the influence of microstructural characteristics on the mechanical and degradation properties of LPBF-processed Zn in both horizontal and vertical planes was revealed, while the underlying deformation mechanisms in different planes were illustrated. The results demonstrated that the horizontal plane exhibited higher mechanical strength compared to the vertical plane, with ultimate tensile strength of 123.6 and 107.86 MPa, respectively, significantly surpassing that of the traditionally cast counterpart (52.7 MPa). Importantly, abundant deformation twins coupled with infrequent microbands and pyramidal ( c + a ) slip systems activated during tensile loading along the vertical plane enabled multiple deformation modes, which sustained durable work hardening ability while delaying plastic instability, resulting in extraordinary plasticity (elongation of 14.2 %). Additionally, synergistic effects between high-density grain boundaries including low-angle grain boundaries and pre-existing dislocations promoted the stable presence of a passive film along the horizontal plane, thus exhibiting relatively low corrosion sensitivity. Furthermore, the LPBF-processed Zn also demonstrated favorable biological activity and osteogenic potential. These findings provide valuable insights into multiple mechanisms underlying anisotropy in mechanical and degradation properties of laser additively manufactured Zn-based materials. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Role of heterogenous microstructure and deformation behavior in achieving superior strength-ductility synergy in zinc fabricated via laser powder bed fusion

Revealing Anisotropic Mechanisms in Mechanical and Degradation Properties of Zinc Fabricated by Laser Powder Bed Fusion Additive Manufacturing

Revealing Anisotropic Mechanisms in Mechanical and Degradation Properties of Zinc Fabricated by Laser Powder B E D Fusion Additive Manufacturing

Effect of Laser Power on Microstructure and Mechanical Properties of Pure Zn Fabricated Via Laser Powder Bed Fusion

Laser additive manufacturing of zinc: formation quality, texture, and cell behavior

Heterogeneous Grain Structure in Biodegradable Zn Prepared Via Mechanical Alloying and Laser Powder Bed Fusion for Strength-Plasticity Synergy

Microstructure evolution and ductility improvement of additively manufactured biodegradable zinc–magnesium alloys via annealing

Microstructure Development of AM-fabricated Pure Zn with Heat-Treatment and Its Mechanical Properties, Degradation Behavior, and Biocompatibility

Effect of Grain Structure on the Mechanical Properties and in Vitro Corrosion Behavior of Additively Manufactured Pure Zn

Heterogeneous amorphous/crystalline ZnZrCu biodegradable alloys with synergistic strength–plasticity prepared by mechanical alloying and laser powder bed fusion

Research Progress on Laser Powder Bed Fusion Additive Manufacturing of Zinc Alloys

Formation Quality, Mechanical Properties, and Processing Behavior of Pure Zinc Parts Produced by Laser-Based Manufacturing for Biodegradable Implants

Strength-ductility Synergy in a Hierarchical Cu-Cr-Zr Alloy Processed Via Laser Powder Bed Fusion

Laser Additive Manufacturing of Zinc Targeting for Biomedical Application

Phase Formation and Strengthening Mechanism of Zn–2 Wt.%cu Alloy Fabricated by Laser Powder Bed Fusion

Fabrication and performance of Zinc-based biodegradable metals: From conventional processes to laser powder bed fusion

Microstructure, Mechanical Properties and Multiphase Synergistic Strengthening Mechanisms of LPBF Fabricated AlZnMgZr Alloy with High Zn Content

Recent progress and perspectives in laser additive manufacturing of biodegradable zinc alloy

Densification, Microstructure, Tribological and Electrochemical properties of pure Zn fabricated by laser powder bed fusion

Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties

Oxides improve the strength of Zn-0.5Mn-0.5Mg alloys proceeded by laser powder bed fusion