Size effect of square concrete-filled steel tubular columns subjected to lateral shear and axial compression: Modelling and formulation

Liu Jin,Lingling Fan,Dong Li,Xiuli Du
DOI: https://doi.org/10.1016/j.tws.2020.107158
2020-12-01
Abstract:<p>Concrete-filled steel tubular (CFST) short columns under the action of wind and seismic load often endure high shearing force and show brittle shear failure, which may exhibit obvious size effect. In this study, a three-dimensional meso-scale simulation method that can consider both the concrete heterogeneity and the contact behavior between concrete core and steel tube was established to investigate the failure behavior and size effect of square CFST columns under combined lateral and axial loads. After verification of the meso-scale model, simulation tests were carried out to discuss the influence of shear-span ratio, axial compression ratio and steel ratio on the failure modes, the nominal shear strength, the ductility and the size effect of square CFST columns. Results indicate that, when the shear-span ratio increases from 1.0 to 3.0, the failure mode of CFST columns turns from brittle shear failure to ductile bending failure, the nominal shear strength decreases and ductility increases, and the size effect in shear would be weakened. The nominal shear strength increases and the column shows better ductility with the increasing axial compression ratio less than 0.4, while the nominal shear strength decreases and the columns present obvious brittleness with the increase of axial load larger than 0.4. Moreover, as steel ratio increases from 0.05 to 0.15, the nominal shear strength and ductility of CFST columns increase, and the size effect on nominal shear strength cannot be weakened. At last, a theoretical formula that can quantitatively show the influence of shear-span ratio on size effect in shear strength was proposed to predict the shear capacity of square CFST columns. The available test data and the simulation results illustrate the rationality and applicability of the theoretical formula.</p>
engineering, mechanical,mechanics, civil
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to explore the size effect and failure behavior of concrete - filled square steel tubular columns under the combined action of lateral shear force and axial compressive force. Specifically, the research aims to: 1. **Establish a three - dimensional meso - simulation method**: Considering the heterogeneity of concrete and the contact behavior between the concrete core and the steel tube, a three - dimensional meso - simulation method was established to study the failure behavior and size effect of concrete - filled square steel tubular columns under combined loads. 2. **Analyze influencing factors**: Through numerical simulation tests, the effects of shear - span ratio, axial - compression ratio and steel ratio on failure mode, nominal shear strength, ductility and size effect were discussed. Among them: - When the shear - span ratio increases from 1.0 to 3.0, the failure mode of the concrete - filled square steel tubular column changes from brittle shear failure to ductile flexural failure, the nominal shear strength decreases, the ductility increases, and the shear size effect weakens. - When the axial - compression ratio is less than 0.4, the nominal shear strength increases and the column shows better ductility; when the axial - compression ratio is greater than 0.4, the nominal shear strength decreases and the column shows obvious brittleness. - When the steel ratio increases from 0.05 to 0.15, the nominal shear strength and ductility increase, but the size effect on the nominal shear strength is not weakened. 3. **Propose a theoretical formula**: Based on the above research results, a theoretical formula that can quantitatively describe the influence of the shear - span ratio on the size effect of shear strength was proposed to predict the shear - bearing capacity of concrete - filled square steel tubular columns. The rationality and applicability of this theoretical formula were verified by available test data and simulation results. In general, this research aims to deeply understand the mechanical properties and size effects of concrete - filled square steel tubular columns under complex loading conditions, and provide theoretical basis and technical support for practical engineering design.