Abstract:Polyhexahydrotriazine (PHTs) films were prepared by polycondensation between the two aromatic diamine monomers and paraformaldehyde and then the thermal curing process. Those two aromatic diamine monomers were 4,4 '-diaminodibenzocrown ether (DACr) and 2,2-bis(P-aminophenoxy) ether (BAPE), which contained both flexible ether and rigid benzene ring structures. Through structural characterization and a variety of performance tests, including thermal performance analysis, tensile testing, contact angle, chemical resistance performance testing, and degradation performance testing, the effect of structural units of DACr and BAPE on the crosslinking structures formation and properties of polymer were investigated. The results show that the rigidity of the structural unit was related to the completeness of the cross-linked structure of the hexahydrotriazine (HT) ring and jointly determined the performance of the PHT film material. The PHT containing the flexible acyclic BAPE structural unit tended to form perfect HT rings, and behaved the high thermal stability (5% thermogravimetric loss temperature is 296.8 degrees C), hydrophilicity and relatively low degree of acid hydrolysis. The PHT film containing the more rigid DACr structural unit had the higher mechanical strength (tensile strength 53.6 MPa), hydrophobicity, resistance to organic reagents and the degree of acid hydrolysis, it was complete degaration in glacial acetic acid solution and recyling the raw monomer of DACr with high yield of more than 83%. Due to the influence of both the structural integrity of HT and the rigidity of the structural unit, the two PHT materials showed the similar glass transition temperatures (T(g)s were 117.8 and 117.9., respectively). This study provides theoretical basis and experience for the structural design and performance regulation of PHT materials. Meantime, the obtained PHT materials meet the degradation requirements and have the potential application value.

Effect of Dual Curing Agent (TDI:DDI) on the Mechanical Properties and Burning Rate of HTPB-Based Solid Propellant

Hydroxyl‐terminated polybutadiene(HTPB) propellants cross‐linked by dimer acid diisocyanate (DDI): Cross‐linking network and properties

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

Effect of Boron‐Aluminium Particles on Rheological Properties of AP/HTPB Based Bi‐Curative Composite Solid Propellants

Biaxial Tensile Mechanical Properties of HTPB Solid Propellant

The Effect of a Novel of Hyperbranched Cross-Linking Agent on the Mechanical of Hydroxyl-Terminated Polybutadiene Based Solid Propellant

Curing and Cross-Linking Processes in the Poly(3,3-bis-azidomethyl oxetane)-tetrahydrofuran/Toluene Diisocyanate/Trimethylolpropane System: A Density Functional Theory and Accelerated ReaxFF Molecular Dynamics Investigation

Investigation of a Low-Toxicity Energetic Binder for a Solid Propellant: Curing, Microstructures, and Performance

Chemical Modification Of Hydroxyl-Terminated Polybutadiene And Its Application In Composite Propellants

Molecular dynamics simulation of bonding role of cyclic borate ester in improving mechanical properties of the HTPB propellant

Dynamic Mechanical Response and Damage Mechanism of HTPB Propellant under Impact Loading

Synthesis and Characterization of a Novel Hydroxy Telechelic Polyfluoroether to Enhance the Properties of HTPB Solid Propellant Binders

Effect of curative in hydroxyl-terminated polybutadiene-based binder system on characteristic properties and kinetics of polymer-based energetic composite

Study on the Effect of Potassium Compound on the Combustion Characteristics of HTPB Composite Solid Propellant

Mechanism of Influence of Active Groups in Binder on Mechanical Properties of HTPB Propellants

Synthesis of a Series of Dual-Functional Chelated Titanate Bonding Agents and Their Application Performances in Composite Solid Propellants

Mechanical properties and influence mechanism of hydroxyl‐terminated polybutadiene propellant under confining pressure

A New Test Method to Obtain Biaxial Tensile Behaviors of Solid Propellant at High Strain Rates

Catalyzed HTPB/HDI-Trimer Curing Reactions and Influence on Pot Life

Relaxation Properties of the Solid Propellant Based on Hydroxyl-Terminated Polybutadiene

Effects of Dibenzocrown Ether and Diphenoxyethylene Diether Structural Units on the Properties of Degradable Polyhexahydrotriazine Thermosetting Resins