Abstract:Attapulgite (ATP) and ATP mixed with SiO2 microspheres (ATPS) supported Cu-Fe-Co modified Fischer-Tropsch (F-T) catalysts were prepared by impregnation method (IM) and impregnation-solution combustion method (IMSC). The catalysts were characterized by N2 adsorption-desorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), hydrogen temperature-programmed reduction (H2-TPR) and CO2-temperature programmed desorption (CO2-TPD). The catalysts were also applied to lower alcohols synthesis from CO hydrogenation. Results show that the IMSC method is much beneficial for the loading, dispersion and reduction of CuO on the prepared catalyst than IM method, which promotes the touch of H2 and CO with Cu active site. The optimum reaction temperature for lower alcohols synthesis is 280°C for the catalysts prepared by both methods. Through the optimization of catalyst combination system between ATP and ATPS supported Cu-Fe-Co based catalysts (CFCK/ATP, CFCK/ATPS) and Cu/ZnO/Al2O3 catalyst (CZA) for methanol synthesis, the ideal catalyst combination system, CZA||CFCK/ATPS-IMSC, is obtained for lower alcohols synthesis. For the dual-bed configuration, a lower alcohols selectivity of 39.6% with the fraction of C2+ alcohols of 22.7% in oxygenates is achieved at CO conversion of 46.3% via the product conversion coupling effect.

Application of Cu-Fe based catalysts in synthesis of low carbon mixed alcohols from syngas

CuZnCoOx Multifunctional Catalyst for in Situ Hydrogenation of 5-Hydroxymethylfurfural with Ethanol As Hydrogen Carrier

Low Temperature Conversion of Syngas to Ethanol in Liquid Phase over Fe Modified CuZn Catalyst: the Promoting Effect of Fe

Study of Cu-Fe-Co-M/SiO2 (M = Unpromoted, Li, Na, K and Cs) Catalysts for Mixed Alcohols Synthesis from CO Hydrogenation

Interfacial Fe5C2-Cu catalysts toward low-pressure syngas conversion to long-chain alcohols

Direct Conversion of Syngas to Higher Alcohols over Multifunctional Catalyst: The Role of Copper-Based Component and Catalytic Mechanism

Study of Cu-Fe-Co-M/SiO<sub>2</sub> (M = Unpromoted, Li, Na, K and Cs) Catalysts for Mixed Alcohols Synthesis from CO Hydrogenation

Synthesis Of Higher Alcohol Mixtures From Syngas Over Modified Copper Catalysts

Catalytic conversion of syngas to mixed alcohols over CuFe-based catalysts derived from layered double hydroxides

Carbon Nanotube-Supported Bimetallic Cu-Fe Catalysts for Syngas Conversion to Higher Alcohols

Heterogeneous Catalytic Conversion of Dry Syngas to Ethanol and Higher Alcohols on Cu-Based Catalysts

Influence of Co Modified Mn/Cu/MgO Catalyst on the Synthesis of Mixed Alcohols from Syngas

Reaction Condition Optimization and Lumped Kinetics Study for Lower Alcohols Synthesis from Syngas Using A Two-Stage Bed Catalyst Combination System

Cu-Fe-Co base catalyst used for synthesizing low carbon alcohol by utilizing synthesis gas as well as preparation method and application thereof in low carbon alcohol synthesizing process by virtue of synthesis gas

Higher alcohols synthesis from syngas over P-promoted non-noble metal Cu-based catalyst

Effects of Cu/Fe ratio on structure and performance of attapulgite supported CuFeCo-based catalyst for mixed alcohols synthesis from syngas

Investigation of Al precursor for ethanol synthesis from syngas on Cu-based multifunctional catalyst

Attapulgite Supported Cu-Fe-Co Based Catalyst Combination System for CO Hydrogenation to Lower Alcohols

Accelerating C2+ Alcohols Synthesis from Syngas by Simultaneous Optimizations of CO Dissociation and Chain Growth over CuCo Alloy Catalyst

Synergistic Effect of Nitrogen-Doped Carbon-Nanotube-supported Cu–Fe Catalyst for the Synthesis of Higher Alcohols from Syngas