Abstract:To investigate the flexural performance of steel-UHPC (ultra-high performance concrete) composite beams with welded steel shear keys (SSK), eight specimens were experimental studied by four-point bending test. The finite element (FE) models were established based on the experimental results, then, the failure mode, load, deflection, strain and relative interface slip were parametric analyzed. The influences of strength, dimensions and configuration of upper concrete slab, steel beams as well as SSK on flexural performance, in terms of load-deflection response, ductility and ultimate energy dissipation, were studied. The experimental results show that steel-UHPC composite beams have superior bearing capacity, deformation capacity, ductility and energy dissipation ability when compared with steel-NSC (normal strength concrete) composite counterparts. Increasing the height of upper concrete slab has a significant effect on improving bending capacity and flexural stiffness, while increasing the width has a significant effect on enhancing deformation, ductility and ultimate energy dissipation. Increasing the yield strength, thickness of web and flange of steel beams has significant effect on improving bending capacity. Reducing the SSK spacing or increasing the yield strength of SSK, height and thickness slightly improve the cracking, yield and ultimate loads, reduce deflections, enhance the flexural stiffness, slightly weakens the ductility and ultimate energy dissipation. Besides, four types of failure modes were defined, based on reasonable assumptions, formulae for bearing capacity were proposed, and the predicted results fit well with experimental results. The results can be taken as reference for the design and application of steel-UHPC composite beams in long-span and heavy-load structures.

Flexural and bond-slip behaviours of engineered cementitious composites encased steel composite beams

Experimental Research on Novel RPC-steel Composite Connections for Prefabricated Glubam-Concrete Composite Beams

Structural Behavior of Fully Prefabricated Glubam-Concrete Composite Beams Constructed of Innovative Connectors

Flexural Performance of Composite RC Beams Having an ECC Layer at the Tension Face

Flexural behaviour of high strength engineered cementitious composites (ECC)-reinforced concrete composite beams

Experimental and theoretical investigations on flexural performance of hybrid fiber reinforced ECC-NC composite beams

Experimental and analytical research on the flexural behaviour of steel–ECC composite beams under negative bending moments

Flexural behavior of normal concrete circular beams strengthened using engineered cementitious composite and stainless steel tube

Flexural Behavior of Steel-Mpc Based High Performance Concrete Composite Beams Subjected to Hogging Moments

Numerical Simulation of Engineering Cementitious Composite Beams Strengthened with Fiber-Reinforced Polymer and Steel Bars

Flexural behaviour of reinforced concrete beams strengthened by NSM technique using ECC

Experimental and Numerical Study on Flexural Performance of a Novel Steel-Encased Concrete Composite Beam

Flexural behavior of castellated partially encased composite (PEC) beams

Experimental and analytical investigation on bond-slip behaviour of deformed bars embedded in engineered cementitious composites

Experimental and Numerical Study of Curved SFRC and ECC composite beams with Various Connectors

Experimental investigation on seismic performance of plain engineered cementitious composite beams

Experimental and Numerical Study on Steel-Concrete Composite Frames with Engineered Cementitious Composites

Flexural Properties of ECC-Concrete Composite Beam

Bond Behavior and Failure Mechanisms of the Interface between Engineered Cementitious Composites and Shaped Steel

Investigation on flexural behavior of steel-UHPC composite beams with steel shear keys

Flexural Performance of Layered ECC-concrete Composite Beam