Abstract:Recycling steel slag into asphalt concrete is an important way to save natural resources and protect the environment. The high asphalt absorption and adsorption and the sensitivity of steel slag aggregate (SSA) to the combined damage of temperature and moisture (volume expansion and poor durability under freeze-thaw cycle damage) still pose risks for the use of SSA in asphalt concrete. It is urgent to develop new utilization methods of steel slag. With this in mind, the material properties of steel slag powder (SSP) and performance characteristics of asphalt concrete incorporating SSP filler were evaluated in this research. The SSP was prepared in the laboratory by grinding steel slag with a particle size of 2.36–4.75 mm. Firstly, the material properties of SSP including the specific surface area, particle gradation, apparent density, chemical compositions, and thermal stability were analyzed. Steel slag (2.36–4.75 mm) and common limestone powder (LP) filler were used as control groups. The grindability of steel slag and the advantages of using SSP as a filler in asphalt concrete were preliminarily analyzed based on the test results of material properties. Then, the Superpave method was used to design asphalt concrete incorporating SSP and LP. Considering that steel slag is sensitive to the combined damage of temperature and moisture, the main engineering performance of asphalt concrete after the combined damage of temperature and moisture was evaluated to further reveal the feasibility of using SSP as a filler. Two combined damage modes, namely hot water damage and freeze-thaw cycle damage, were applied. Results suggest that although the steel slag is more difficult to grind compared to limestone particles, grinding steel slag into SSP has improved the uniformity of its material properties. Good uniformity of material properties, high alkalinity, and excellent thermal stability of SSP give it some advantages in its application in asphalt concrete. Although the freeze-thaw cycle damage has a slightly more significant effect on the engineering performance of asphalt concrete than hot water damage, compared to the asphalt concrete with LP filler, even after freeze-thaw cycle damage for three cycles asphalt concrete incorporating SSP still possesses comparable or better volume stability, mechanical performance, high-temperature deformation resistance, low-temperature crack resistance, fatigue crack resistance, and fatigue durability.

Reducing Volume Expansion of Steel Slag by Using a Surface Hydrophobic Waterproof Structure

Laboratory Evaluation On The Performance Of Porous Asphalt Mixture With Steel Slag For Seasonal Frozen Regions

Expansion inhibition of steel slag in asphalt mixture by a surface water isolation structure

Study on the Performance of Steel Slag and Its Asphalt Mixture with Oxalic Acid and Water Erosion

Effect of Dry–Wet and Freeze–Thaw Repeated Cycles on Water Resistance of Steel Slag Asphalt Mixture

Application of Steel Slag in Road Semi-Rigid Subgrade and its Volume Stability Modification Progress Study

Surface Modification of Steel Slag Aggregate for Engineering Application in Asphalt Mixture

Properties of a Steel Slag-Permeable Asphalt Mixture and the Reaction of the Steel Slag-Asphalt Interface

Pre-treatment of steel slag and its applicability in asphalt mixtures for sustainable pavements

Study of the long-term water stability of asphalt mixtures containing steel slag aggregate

Preventing Swelling and Decreasing Alkalinity of Steel Slags Used in Highway Infrastructures

Study on pavement performance of steel slag asphalt mixture based on surface treatment

Research on Improving Moisture Resistance of Asphalt Mixture with Compounded Recycled Metallurgical Slag Powders

Hazardous characteristics and variation in internal structure by hydrodynamic damage of BOF slag-based thin asphalt overlay

Evaluation of Mitigation Techniques for the Expansive Behavior of Steel Slag

Performance Evaluation of Asphalt Concrete Incorporating Steel Slag Powder as Filler under the Combined Damage of Temperature and Moisture

Research on Water Stability and Moisture Damage Mechanism of a Steel Slag Porous Asphalt Mixture

Environmental and feasible analysis of recycling steel slag as aggregate treated by silicone resin

Analysis of Asphalt Mixtures Modified with Steel Slag Surface Texture Using 3D Scanning Technology

Research on Characteristics of Steel Slag Powder and Its Application in Asphalt Mixture

Performance characterization and enhancement mechanism of recycled asphalt mixtures involving high RAP content and steel slag