Abstract:OBJECTIVE Learning surgical skills is an essential part of neurosurgical training. Ideally, these skills are acquired to a sufficient extent in an ex vivo setting. The authors previously described an in vitro brain tumor model, consisting of a cadaveric animal brain injected with fluorescent agar-agar, for acquiring a wide range of basic neuro-oncological skills. This model focused on haptic skills such as safe tissue ablation technique and the training of fluorescence-based resection. As important didactical technologies such as mixed reality and 3D printing become more readily available, the authors developed a readily available training model that integrates the haptic aspects into a mixed reality setup. METHODS The anatomical structures of a brain tumor patient were segmented from medical imaging data to create a digital twin of the case. Bony structures were 3D printed and combined with the in vitro brain tumor model. The segmented structures were visualized in mixed reality headsets, and the congruence of the printed and the virtual objects allowed them to be spatially superimposed. In this way, users of the system were able to train on the entire treatment process from surgery planning to instrument preparation and execution of the surgery. RESULTS Mixed reality visualization in the joint model facilitated model (patient) positioning as well as craniotomy and the extent of resection planning respecting case-dependent specifications. The advanced physical model allowed brain tumor surgery training including skin incision; craniotomy; dural opening; fluorescence-guided tumor resection; and dura, bone, and skin closure. CONCLUSIONS Combining mixed reality visualization with the corresponding 3D printed physical hands-on model allowed advanced training of sequential brain tumor resection skills. Three-dimensional printing technology facilitates the production of a precise, reproducible, and worldwide accessible brain tumor surgery model. The described model for brain tumor resection advanced regarding important aspects of skills training for neurosurgical residents (e.g., locating the lesion, head position planning, skull trepanation, dura opening, tissue ablation techniques, fluorescence-guided resection, and closure). Mixed reality enriches the model with important structures that are difficult to model (e.g., vessels and fiber tracts) and advanced interaction concepts (e.g., craniotomy simulations). Finally, this concept demonstrates a bridging technology toward intraoperative application of mixed reality. OBJECTIVE Learning surgical skills is an essential part of neurosurgical training. Ideally, these skills are acquired to a sufficient extent in an ex vivo setting. The authors previously described an in vitro brain tumor model, consisting of a cadaveric animal brain injected with fluorescent agar-agar, for acquiring a wide range of basic neuro-oncological skills. This model focused on haptic skills such as safe tissue ablation technique and the training of fluorescence-based resection. As important didactical technologies such as mixed reality and 3D printing become more readily available, the authors developed a readily available training model that integrates the haptic aspects into a mixed reality setup. METHODS The anatomical structures of a brain tumor patient were segmented from medical imaging data to create a digital twin of the case. Bony structures were 3D printed and combined with the in vitro brain tumor model. The segmented structures were visualized in mixed reality headsets, and the congruence of the printed and the virtual objects allowed them to be spatially superimposed. In this way, users of the system were able to train on the entire treatment process from surgery planning to instrument preparation and execution of the surgery. RESULTS Mixed reality visualization in the joint model facilitated model (patient) positioning as well as craniotomy and the extent of resection planning respecting case-dependent specifications. The advanced physical model allowed brain tumor surgery training including skin incision; craniotomy; dural opening; fluorescence-guided tumor resection; and dura, bone, and skin closure. CONCLUSIONS Combining mixed reality visualization with the corresponding 3D printed physical hands-on model allowed advanced training of sequential brain tumor resection skills. Three-dimensional printing technology facilitates the production of a precise, reproducible, and worldwide accessible brain tumor surg -Abstract Truncated-

Enhancing the Microneurosurgical Training: Development of the Folded Placenta Model for Simulation of the Deep Operative Field Challenges of Cranial Procedures

Model of Arteriovenous Malformation Created in Human Placenta for Training in Vascular Microneurosurgery

The modified placenta model for microsurgery training: Recommended methods for comprehensive microsurgery experience

Novel Simulation Model with Pulsatile Flow System for Microvascular Training, Research, and Improving Patient Surgical Outcomes

A realistic aneurysm clipping simulation combining 3D-printed and placenta-based models—how I do it

Microneurosurgical Skills Training

High-fidelity, low-cost synthetic training model for fetoscopic spina bifida repair

Retrosigmoid Craniectomy and Suprameatal Drilling-3-Dimensionally Printed Microneurosurgical Simulation: 2-Dimensional Operative Video

Development and Validation of a Novel Methodological Pipeline to Integrate Neuroimaging and Photogrammetry for Immersive 3D Cadaveric Neurosurgical Simulation

Dural Closure Training With Prototyped Model

Development and validation of a synthetic 3D-printed simulator for training in neuroendoscopic ventricular lesion removal

Training Performance Assessment for Intracranial Aneurysm Clipping Surgery Using a Patient-Specific Mixed-Reality Simulator: A Learning Curve Study

Training in Skull Base Endonasal Endoscopic Surgery: Development and Validation of a Novel Low-Cost Simulation with Animal Cadaveric Model

Development and evaluation of a craniocerebral model with tactile-realistic feature and intracranial pressure for neurosurgical training

Combined use of 3D printing and mixed reality technology for neurosurgical training: getting ready for brain surgery

A Practical 3D-Printed Model for Training of Endoscopic and Exoscopic Intracerebral Hematoma Surgery with a Tubular Retractor

Advanced Manufacturing in the Fabrication of a Lifelike Brain Glioblastoma Simulator for the Training of Neurosurgeons

Intraoperative Videogrammetry and Photogrammetry for Photorealistic Neurosurgical 3-Dimensional Models Generated Using Operative Microscope: Technical Note

Low-Cost 3D Models for Cervical Spine Tumor Removal Training for Neurosurgery Residents

Perforator Dissection Porcine Abdominal Model: A Novel Simulator to Improve Microsurgical Training

Neurosurgical Microvascular Anastomosis: Systematic Review of the Existing Simulators and Proposal of a New Training Classification System