Abstract:Due to the recent interest in renewable energy and waste heat for power generation, organic Rankine cycle (ORC) has drawn considerable attention. By applying a dual-pressure evaporation strategy, the exergy loss in the evaporators can be reduced significantly, resulting in an enhanced system performance. In this study, detailed modelling analyses have been conducted to evaluate the effect of zeotropic working fluids on the performance of two dual-pressure ORC (DPORC) arrangements, namely, DPORC-P (parallel) and DPORC-S (in-series), where the working fluid pair R245fa and R152a has been selected to form a representative zeotropic mixture. It has been found that as a zeotropic mixture is used, both systems show improved cycle net power outputs. Interestingly, the highest power outputs occur at mass fractions that result in matching temperature profiles between the hot and cold fluids in the condenser. At a heat source temperature of 120 °C, a DPORC-S always has a greater net power output regardless of the mass fraction of the zeotropic mixture; as heat source temperature reduces, the difference of power output between the two systems tends to drop: for a heat source temperature of 90 °C, a DPORC-P has a better performance as the mixture mass fraction is between 0.4 and 0.9. The influence of zeotropic fluids to the heat transfer of the condenser has also been investigated and it indicates that a significantly larger heat transfer area is required for a zeotropic fluid; based on a fixed heat transfer area, the performance enhancement of a zeotropic system is only seen as the condenser heat transfer area is considerably large.

Flow and heat transfer characteristics of nano-organic working fluid during evaporation for organic Rankine cycle

Advances in Working Fluids for Organic Rankine Cycle

Working Fluid Selection for a Small-Scale Organic Rankine Cycle Recovering Engine Waste Heat

Experimental and simulation study on a zeotropic ORC system using R1234ze(E)/R245fa as working fluid

Experimental Study on a Small-Scale Pumpless Organic Rankine Cycle with R1233zd(E) As Working Fluid at Low Temperature Heat Source

Operation and performance of a low temperature organic Rankine cycle

Experimental investigation on stability and evaluation of nanorefrigerant applied on organic Rankine cycle system

Experimental Study of the Organic Rankine Cycle under Different Heat and Cooling Conditions

Thermodynamic Performance Comparison of Single-pressure and Dual-pressure Evaporation Organic Rankine Cycles Using R1234ze(E)

INVESTIGATION OF THE EFFECT OF USING DIFFERENT NANOFLUIDS ON THE PERFORMANCE OF THE ORGANIC RANKINE CYCLE

Experimental Study on the Comparative Performance of R1233zd(E) and R123 for Organic Rankine Cycle for Engine Waste Heat Recovery

Thermodynamic performance analyses and optimization of subcritical and transcritical organic Rankine cycles using R1234ze(E) for 100–200 °C heat sources

Working fluid selection for low temperature transcritical organic Rankine cycle

Thermo-economic and Environmental Analysis of Various Low-Gwp Refrigerants in Organic Rankine Cycle System

Parallel and in-series arrangements of zeotropic dual-pressure Organic Rankine Cycle (ORC) for low-grade waste heat recovery

Selection and Evaluation of Dry and Isentropic Organic Working Fluids Used in Organic Rankine Cycle Based on the Turning Point on Their Saturated Vapor Curves

Development and Dynamic Characteristics of an Organic Rankine Cycle

Thermodynamic Analysis of Organic Rankine Cycle System with R1234yf

Effect of Working Fluids on the Performance of a Novel Direct Vapor Generation Solar Organic Rankine Cycle System

Operation Characteristic of a R123-based Organic Rankine Cycle Depending on Working Fluid Mass Flow Rates and Heat Source Temperatures

Thermal stability of a mixed working fluid (R513A) for organic Rankine cycle