Abstract:An experimental perovskite solar cell (PSC) with the structure Au/Spiro-MeOTAD/CH3NH3PbI3/PEDOT:PSS/ITO was fabricated. The measurements of main photovoltaic characteristics were provided. The current-voltage dependences (I-V curves) were measured conducted in the voltage range from -1V to 1V. During the measurements, the corresponding values were calculated of the short-circuit current density(Jsc) and open-circuit voltage(Uoc) were obtained as 1.23 mA/cm2 and 0.19 V, respectively. Subsequently, an analytical model corresponding to this structure was formulated. For modeling the parameters of the perovskite solar cell, the Comsol Multiphysics environment was used, this environment is based on the finite element method. The relevant computations were provided to obtain the corresponding values of the short-circuit current density and open-circuit voltage as 3.29 mA/cm2 and 0.2 V, respectively, with the maximum theoretically calculated power of this structure being 0.11 W. The experimental outcomes were juxtaposed with the predictions of the analytical computations, and the modeling results were empirically validated. An analytically accomplished model of the same structure was built by adding an electron transport layer (ETL). An organic material BCP (Bathocuproine) was used as an supplementary ETL layer. During the optimization of the PSC, the main datums were mathematically counted. Such values as the short-circuit current density of 10.17 mA/cm2, open-circuit voltage of 1.2 V, and the maximum power value of Au/BCP/Spiro-MeOTAD/CH3NH3PbI3/PEDOT:PSS/ITO structure, which is 3.21 W were rated. A comparison of the volt-ampere characteristics of perovskite cells in dark and light modes was conducted for primary and optimized structures. The main parameters, obtained during the modeling of the experimental sample and subsequent model optimization, were compared. Specifically one of the key parameters of solar cell heterostructures the fill factor was evaluated and found to have increased from 16.52% to 25.00%, respectively. The light-sensitive behavior of the perovskite cell were visibly enhanced.

Thermal Analysis of a Plasmonic Perovskite Solar Cell: Using Coupled Opto-Electro-Thermal (OET) Modeling

Thermal Modeling of Perovskite Solar Cells: Electron and Hole Transfer Layers Effects

Heterojunction Perovskite Solar Cells: Opto-Electro-Thermal Physics, Modeling, and Experiment

Multiphysics Modeling of Plasmonic Organic Solar Cells with a Unified Finite-Difference Method

Optical, Thermal, and Electrical Analysis of Perovskite Solar Cell with Grated CdS and Embedded Plasmonic Au Nanoparticles

Exploring Optoelectronic‐Thermal Coupling in Perovskite Solar Cells Utilizing Varied Hole Transport Layers

Design and analysis of high-efficiency perovskite solar cell using the controllable photonic structure and plasmonic nanoparticles

Optimization of Hollow Materials-Based Electron Transport Layer for Enhanced Performance of Perovskite Solar Cell

The role of plasmonic metal-oxides core-shell nanoparticles on the optical absorption of Perovskite solar cells

OPTIMIZATION OF THE PEROVSKITE SOLAR CELL STRUCTURE

Modelling and Numerical Evaluation of Photovoltaic Parameters of a Highly Efficient Perovskite Solar Cell Based on Methylammonium Tin Iodide

Morphological investigation and 3D simulation of plasmonic nanostructures to improve the efficiency of perovskite solar cells

Design and simulation of CsPb.625Zn.375IBr2-based perovskite solar cells with different charge transport layers for efficiency enhancement

Numerical Simulation of Cs2AgBiBr6-based Perovskite Solar Cell with ZnO Nanorod and P3HT as the Charge Transport Layers

Impacts of plasmonic nanoparticles incorporation and interface energy alignment for highly efficient carbon-based perovskite solar cells

Performance enhancement of a planar perovskite solar cell with a PCE of 19.29% utilizing MoS 2D material as a hole transport layer: a computational study

A Novel Perovskite Solar Cell Comprising CsPbI2Br/Cs2SnI6 (CsGeI3) Cascade Absorbing Bilayer and Cr2O3 Electron Transport Material: A Theoretical Comparison Study

Real-Time Dynamic Observation of a Thermal and Electrical Coeffect on the Interfacial Evolution of Hybrid Perovskite Solar Cells by Electrochemical Impedance Spectroscopy

Insights into the photovoltaic properties of indium sulfide as an electron transport material in perovskite solar cells

Comparative Analysis and Performance Optimization of Low-Cost Solution-Processed Hybrid Perovskite-Based Solar Cells With Different Organic HTLs