Abstract:In this study, methods of completing the structural conversion of partly crystalline cellulose II were studied by solid-state 13C CP/MAS NMR spectroscopy and X-ray diffraction. The study incorporated post-treatments of samples that had been mercerized or regenerated to yield somewhat crystalline cellulose II. These post-treatments used different temperatures, lower concentrations of NaOH than used in, for example, the original mercerization, and different neutralization methods. The cellulose employed was originally filter paper from wood pulp that was subsequently mercerized or dissolved and regenerated to create partly crystalline cellulose II. The variations in rate of each component were monitored at different NaOH concentrations and reaction temperatures during the treatment; these components include the crystalline and accessible surface as well as the inaccessible surface/amorphous region. Subsequently, neutralization was performed for the crystallization of cellulose II and the effects of the acid employed were also evaluated. It can be thought that controlling the partial Na-cellulose construction is important for improving the assembly of cellulose II; this is achieved by optimizing the concentration of NaOH, treatment temperature, and selection of acid for neutralization. NMR spectroscopy of the intermediate state of the NaOH detected the partial generation of Na-cellulose; further, another domain exhibited the spectrum of highly crystallized cellulose II. It is believed that the selective Na-cellulose construction in the inaccessible surface cellulose is the result of an increase in the size of cellulose II crystals. During the NaOH treatment, at a concentration of 10%, the crystallinity index evaluated by both NMR and X-ray was maximized; further, at the treatment temperature of 80 °C the crystallinity of the cellulose II evaluated by NMR improved. Moreover, the neutralization, which was conducted after the alkaline treatment with H2SO4, established the most suitable conditions for the crystallization of cellulose II.Graphic abstract Open image in new window

Effect of Mercerization on the Properties of Cellulose Fiber and Cellulose Hydrogel Extracted from Pineapple Leaf Fiber

CHARACTERIZATION OF PINEAPPLE LEAF FIBER FOLLOWING ENZYMATIC DEGUMMING

Utilizing Nata de Pina for Hydrogel Synthesis: Effects of Citric Acid on Hydrogel Characteristics

Effect of chemical treatment of pineapple crown fiber in the production, chemical composition, crystalline structure, thermal stability and thermal degradation kinetic properties of cellulosic materials

Chemical surface modification of pineapple leaf fiber for polymer composites applications: Comparative study

Physico-Mechanical Properties of Kenaf Pulp Cellulose Membrane Cross-linked with Glyoxal (Sifat Fiziko-Mekanik Membran Selulosa daripada Pulpa Kenaf yang Ditaut-silang dengan Glioksal)

Production of oil palm mesocarp fiber-based hydrogel using selected cross-linking acids

Cellulose Nanofibers as Functional Biomaterial from Pineapple Stubbles via TEMPO Oxidation and Mechanical Process

Isolation and Characterization of Nanocrystalline Cellulose Isolated from Pineapple Crown Leaf Fiber Agricultural Wastes Using Acid Hydrolysis

Synthesis of cellulose-g-poly(acrylic acid) with high water absorbency using pineapple-leaf extracted cellulose fibers

Effect of acid hydrolysis on regenerated kenaf core membrane produced using aqueous alkaline-urea systems

The effect of fibre volume fraction and mercerization on the properties of all-cellulose composites

Investigation of Bleaching Stage in Cellulose Isolation from Pineapple Leaves for Cellulose Nanocrystals Production

Effect of Fiber Morphology and Elemental Composition of Ananas comosus Leaf on Cellulose Content and Permittivity

Effect of Homogenization Pressure on Bacterial Cellulose Membrane Characteristic Made from Pineapple Peel Waste

The comparison of hydrothermal, ultrasonication and microwave assisted alkalization of cellulose from Borassus flabellifer fruit husk

Construction of physically crosslinked cellulose nanofibrils/alkali lignin/montmorillonoite/polyvinyl alcohol network hydrogel and its application in methylene blue removal

Effect of teak wood lignocellulose pretreatment on the performance of cellulose-graft-(net-poly(acrylamide-co-acrylic acid)) for water absorption and dye removal

Cellulose and lignin purified from Metroxylon sagu palm fronds by a new technology with 2-methylanthraquinone cooking and peroxymonosulfuric acid bleaching

Extraction of lignocellulosic fiber and cellulose microfibrils from agro waste-palmyra fruit peduncle: Water retting, chlorine-free chemical treatments, physio-chemical, morphological, and thermal characterization

13C NMR and XRD studies on the enhancement of cellulose II crystallinity with low concentration NaOH post-treatments