Abstract:Shield-gate trench MOSFET in a low-to-medium voltage range (12－250 V) plays a key role in the power conversion market due to its low power loss caused by the sheild-gate structure. In order to eliminate the faults resulting from the parasitic effects of the device and improve the conversion efficiency, the device model is indispensable in designing a circuit system. In this paper, a compact model of shield-gate trench MOSFET based on BSIM4 is proposed, including the DC model and the capacitance model. In the DC model, the basic MOSFET structure uses BSIM4, and the equivalent resistances of the basic MOSFET in series are divided into three parts. The equivalent resistance model of JFET region is established by using the electric potential difference between both ends for the first time, and the equivalent resistance model of electron diffusion region is also introduced, in order to solve the problem of current error caused by neglecting the source potential of JFET region. The equivalent resistance between drain and JFET region and the equivalent resistance of electron diffusion region both prove to be constant. In the capacitance model based on BSIM4, the model of shield-gate to drain capacitance is added to the model of drain to source capacitance, and the voltage bias between drain and gate in the model of gate to drain capacitance is modified into the potential difference between the node at the end of the gate-drift overlap region and the gate. Poisson equations are used to solve the electric potential of this node. Furthermore, the gate oxide thickness factor k1, the shield-gate oxide thickness factor k2, the equivalent length of gate-drift overlap Lovequ and the equivalent length of shield-gate LSHequ are introduced to redefine the position of gate and shield-gate, thereby simplifying the Poisson equations and ensuring the smoothness of the potential curve of the node. Comparison of the data from the simulation by using Verilog-A program with the test results from the experimental platform shows that the model simulation results fit well with the test data, Therefore, the proposed model is verified.

Physics, Technology, and Modeling of Complementary Asymmetric MOSFETs

Current modeling and simulation of dual-material surrounding-gate MOSFET with asymmetric halo

Si- and Ge-Based Electronic Devices

Comprehensive Analysis of Paralleled SiC MOSFETs Current Imbalance under Asynchronous Gate Signals

A Fully Analytical Current Model for Gate–Source Overlap Tunneling FETs as the Ternary Devices

A Compact Model of Shield-Gate Trench MOSFET Based on BSIM4

Symmetric BSIM-SOI—Part II: A Compact Model for Partially Depleted SOI MOSFETs

Symmetric BSIM-SOI—Part I: A Compact Model for Dynamically Depleted SOI MOSFETs

An Analytical Subthreshold Swing Model for Fully-Depleted MOSFETs with Vertical Gaussian Profile Fabricated on Modified Silicon-on-insulator Wafers

Analytical Modeling and Simulation of Dual-Material Surrounding-Gate Metal–Oxide–Semiconductor Field Effect Transistors with Single-Halo Doping

Analytical Drain Current Modeling of Dual-Material Surrounding-Gate MOSFETs.

A unified carrier-based model for symmetric Double-Gate and Surrounding-Gate MOS transistors

A framework for generic physics based double-gate MOSFET modeling

Tunnel Field-Effect Transistor: Impact of the Asymmetric and Symmetric Ambipolarity on Fault and Performance in Digital Circuits

A Physics-Based Compact Model of Shield Gate Trench MOSFET.

Design of a compact MOSFET model suitable for geometric programming

A Unified Carrier-Based Model for Undoped Symmetric Double-Gate and Surrounding-Gate Mosfets

Carrier-Based Approach: A Generous Strategy to Develop Compact Model of Non-Classical CMOS

Transistor Engineering Based on 2D Materials in the Post-Silicon Era

Bsim5 Mosfet Model

A Non-Charge-Sheet Analytic Model for Symmetric Double-Gate MOSFETs With Smooth Transition Between Partially and Fully Depleted Operation Modes