Abstract:ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Reversible Adsorption of Ammonia in the Crystalline Solid of a CO 2 H-Functionalized Cyclic Oligophenylene

Reversible and selective ammonia capture by a layered Co(II) coordination polymer with dense carboxyl pendants

High Ammonia Adsorption in MFM-300 Materials: Dynamics and Charge Transfer in Host-Guest Binding

Ammonia Storage by Reversible Host–Guest Site Exchange in a Robust Metal–Organic Framework

Beyond Fertilizers: NH4ZnPO4 for the Reversible Chemical Storage of Ammonia

Efficient Capture and Low Energy Release of NH3 by Azophenol Decorated Photoresponsive Covalent Organic Frameworks

Efficient capture and storage of ammonia in robust aluminium-based metal-organic frameworks

Ammonia Capture within Zirconium Metal-Organic Frameworks: Reversible and Irreversible Uptake

Sulfonated and Ordered Mesoporous Polymers for Reversible Adsorption of Ammonia: Elucidation of Sequential Pore-Space Diffusion

Anchoring LiCl in the Nanopores of Metal-Organic Frameworks for Ultra-High Uptake and Selective Separation of Ammonia

Nanoporous adsorbents for hydrogen storage

Amine Chemistry of Porous CO2 Adsorbents

Ammonia Capture Within Isoreticular Metal-Organic Frameworks with Rod Secondary Building Units

Reversible Construction of Ionic Networks Through Cooperative Hydrogen Bonds for Efficient Ammonia Absorption

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

Self-Healing Hydrogen-Bonded Organic Frameworks for Low-Concentration Ammonia Capture.

Ammonia Concentrator for Repeatable Adsorption/Desorption Using Nickel Hexacyanoferrate as Adsorbent and Production of Solid Ammonium Bicarbonate

High ammonia storage capacity in LiCl nanoparticle-embedded metal-organic framework composites

Pore With Gate: Enhancement Of The Isosteric Heat Of Adsorption Of Dihydrogen Via Postsynthetic Cation Exchange In Metal-Organic Frameworks

Computational Screening of Metal-Organic Frameworks for Ammonia Capture from H2/N2/NH3 Mixtures

Reversible hydrogen storage in Li‐functionalized [2,2,2]paracyclophane at cryogenic to room temperatures: A computational quest