Abstract:Nonlinear quasi-zero stiffness (QZS) has recently attracted significant attention from the scientific and engineering community as a method for designing low-frequency vibration isolators. However, previous studies primarily used bistable structures and linear springs to provide negative and positive stiffness, respectively, which limits the QZS range and loading capacity of QZS isolators. This work proposes a novel nonlinear stiffness-modulated anti-vibration structure combined with a disc spring group and a volute spring and demonstrates its feasibility for low-frequency vibration isolation under heavy loads. The asymmetrical negative stiffness provided by the disc spring group and hardened positive stiffness provided by the volute spring compensate each other to construct QZS characteristics. Their nonlinearities can weaken each other, which can lead to a wide QZS range. At the QZS position, the disc springs and the volute spring together provide the positive force, which ensures a large loading capacity. By adjusting the design parameters, different QZS characteristics can be conveniently realized. Compared with traditional QZS structures and typical X-shaped structures, the QZS range of the proposed anti-vibration structure can be, respectively, extended by 2.3 and 1.5 times without sacrificing loading capacity. The dynamic equation is derived from the original nonlinear force expression rather than the typical polynomial approximation expression, which can improve the accuracy of the results, especially under large excitation. The displacement transmissibility obtained by the alternating frequency–time harmonic balance method indicates that the proposed anti-vibration structure exhibits the best vibration isolation performance compared with the linear isolators, traditional QZS isolators, and typical X-shaped isolators. In addition, such a stiffness-modulated anti-vibration structure has a higher sensitivity to damping and a lower sensitivity to base excitation amplitude, which makes it more potential for engineering applications. Besides, the validity of the theoretical analysis is verified by static compression tests and dynamic experiments. This work provides a new method for designing and analysing QZS isolators for heavy-duty low-frequency vibration isolation required in many engineering practices.

Nonlinear stiffness mechanism designed by topology optimization reduces backpack vibration

A simple model for predicting walking energetics with elastically-suspended backpack.

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

Design and Investigation of a Suspended Backpack With Wide-Range Variable Stiffness Suspension for Reducing Energetic Cost

Development of a Novel Elastic Load-Carrying Device: Design, Modeling and Analysis

Effect of Negative Stiffness Mechanism in a Vibration Isolator with Asymmetric and High-Static-low-dynamic Stiffness

Design of an Elastically Suspended Backpack with a Tunable Damper

Energy Performance Analysis of a Suspended Backpack with an Optimally Controlled Variable Damper for Human Load Carriage

An Ergonomics Evaluation of the Vibration Backpack Harness System in Walking

A compact nonlinear stiffness-modulated structure for low-frequency vibration isolation under heavy loads

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Design, Analysis, and Experimental Validation of an Active Constant-Force System Based on a Low-Stiffness Mechanism

Stiffness Design, Analysis and Validation of a Parallel-Mechanism Equivalent Suspension System

Vibration suppression using integrated topology optimization of host structures and damping layers

A device capable of customizing nonlinear forces for vibration energy harvesting, vibration isolation, and nonlinear energy sink

Enhance the energy dissipation ability of sleeve-type negative stiffness structures via a phase-difference mechanism

Design of a high stiffness and hyper-damping vibration isolator based on negative stiffness mechanism

The cLVSM: A Novel Compact Linear Variable Stiffness Mechanism Based on Circular Beams

Vibration Attenuation Using A Nonlinear Dynamic Vibration Absorber With Negative Stiffness

Inverse-designed metastructures with customizable low dynamic stiffness characteristics for low-frequency vibration isolation