Solvothermal assisted synthesis of CoFe2O4/CNTs nanocomposite and their enhanced microwave absorbing properties

Yue Yuan,Shicheng Wei,Yi Liang,Bo Wang,Yujiang Wang,Wei Xin,Xinlei Wang,Yu Zhang
DOI: https://doi.org/10.1016/j.jallcom.2021.159040
IF: 6.2
2021-06-01
Journal of Alloys and Compounds
Abstract:Cobalt ferrite/carbon nanotubes (CoFe2O4/CNTs) nanocomposite absorber materials were synthesized by a simple solvothermal method. The effects of CNTs on the microstructure, electromagnetic and microwave absorbing properties of CoFe2O4 were investigated systematically. Morphological analysis showed a network like structure where CoFe2O4 nanoparticles were connected by carbon nanotubes forming large block-shaped wave absorbers. In addition, the reflection loss of CoFe2O4/CNTs reached −37.39 dB at a thickness of 1.7 mm, along with an effective absorption bandwidth of 5.2 GHz, which shows better absorption ability than pure cobalt ferrite. The wide absorption bandwidth of the fabricated CoFe2O4/CNTs nanocomposite at such a thin thickness is highly desirable for microwave absorbers used in various technological applications.
materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
What problem does this paper attempt to address?
This paper aims to solve the problems of high density and narrow absorption bandwidth when cobalt ferrite (CoFe₂O₄) is used as a microwave - absorbing material. By introducing carbon nanotubes (CNTs) to form CoFe₂O₄/CNTs nanocomposites, the electromagnetic wave absorption performance of the material is improved. Specifically, this research focuses on the following points: 1. **Synthesis method**: The CoFe₂O₄/CNTs nanocomposites were synthesized by a simple solvothermal method. 2. **Structure and performance analysis**: The influence of carbon nanotubes on the microstructure, electromagnetic properties and microwave absorption properties of CoFe₂O₄ was systematically studied. 3. **Performance optimization**: By introducing carbon nanotubes, the microwave absorption capacity of the material was significantly improved. In particular, a wide absorption bandwidth and strong absorption intensity were achieved at a relatively thin thickness. ### Main findings - **Microstructure**: CoFe₂O₄ nanoparticles are connected by carbon nanotubes to form a network structure, which is helpful for forming large - block absorbers. - **Electromagnetic properties**: The reflection loss of the CoFe₂O₄/CNTs nanocomposites reaches - 37.39 dB at a thickness of 1.7 mm, and the effective absorption bandwidth is 5.2 GHz, showing better absorption capacity than pure cobalt ferrite. - **Mechanism analysis**: Carbon nanotubes not only enhance the conductivity of the material, but also promote the generation of interface polarization and dipole polarization, thereby improving the dielectric loss capacity. ### Application prospects This lightweight CoFe₂O₄/CNTs nanocomposite with broadband absorption performance has high potential in various technological applications, especially in scenarios where efficient electromagnetic wave absorption is required, such as improving the reliability of electronic devices and electromagnetic interference shielding. ### Conclusion This research successfully prepared CoFe₂O₄/CNTs nanocomposites, and through systematic experimental and theoretical analysis, proved their excellent performance in microwave absorption. These results provide new ideas and methods for the development of low - cost, high - performance electromagnetic wave absorption materials.