A Graphene-Based Stopband FSS with Suppressed Mutual Coupling in Dielectric Resonator Antennas

Wei Qian,Wei Xia,Wenqing Zhou,Rongguo Song,Xin Zhao,Daping He

DOI: https://doi.org/10.3390/ma14061490

IF: 3.4

2021-03-18

Materials

Abstract:A novel stopband frequency-selective surface (FSS) made of high-conductivity graphene assemble films (HCGFs) for reducing the mutual coupling between dielectric resonator antennas (DRAs) is investigated and presented. The FSS is a “Hamburg” structure consisting of a two-layer HCGF and a one-layer dielectric substrate. A laser-engraving technology is applied to fabricate the FSS. The proposed improved Jerusalem cross FSS, compared with cross FSS and Jerusalem cross FSS, can effectively reduce the size of the unit cell by 88.89%. Moreover, the FSS, composing of 2 × 10-unit cells along the E-plane, is proposed and embedded between two DRAs, which nearly has no effect on the reflection coefficient of the antenna. However, the mutual coupling is reduced by more than 7 dB on average (7.16 dB at 3.4 GHz, 7.42 dB at 3.5 GHz, 7.71 dB at 3.6 GHz) with the FSS. The patterns of the antenna are also measured. Therefore, it is suggested that the proposed FSS is a good candidate to reduce mutual coupling in the multiple-input–multiple-output (MIMO) antenna system for 5G communication.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

This paper mainly discusses how to use highly conductive graphene thin films (HCGFs) to construct a novel bandstop frequency selective surface (FSS) to reduce the mutual coupling between dielectric resonator antennas (DRAs). A "hamburger" structure FSS is proposed in the study, which consists of two layers of HCGF and one layer of dielectric substrate, manufactured using laser engraving technology. Compared with the traditional cross-shaped FSS and Jerusalem cross-shaped FSS, the improved Jerusalem cross-shaped FSS can effectively reduce the unit cell size by 88.89%. Experimental results show that when embedded between two DRAs, this FSS has little effect on the reflection coefficient of the antenna, but can reduce the mutual coupling by an average of more than 7dB (7.16dB, 7.42dB, and 7.71dB at 3.4GHz, 3.5GHz, and 3.6GHz respectively), with no significant impact on the antenna radiation pattern. Therefore, this FSS is considered a good candidate solution for reducing mutual coupling in multiple-input multiple-output (MIMO) antenna systems in 5G communication.