Abstract:Accurate online mass flow rate measurement of pneumatically conveyed particles is desirable to convert a conventional pulverized fuel-fired power station into a smart thermal power plant. This article presents a novel method for the online measurement of the mass flow rate of pulverized fuel through acoustic emission (AE) detection and electrostatic sensing. An integrated sensing head with an AE probe and three sets of electrostatic sensor arrays is developed. The proposed method determines the particle velocity by multichannel cross correlation of the electrostatic signals and extracts the information about mass flow rate from the AE signal arising from impacts of particles with a waveguide protruding into the flow. An analytical model that relates the energy of the AE signals, the particle velocity, and the mass flow rate is established. The sensing head was mounted on the vertical and horizontal sections of a 72-mm bore laboratory-scale test rig conveying fine silica particles. Experimental tests were conducted under a range of flow conditions and installation orientations to assess the performance of the developed measurement system. The results demonstrate that the sensing head should be installed in any orientation away from the elbow on the vertical section of a pipe, while for installation on a horizontal pipe, the waveguide should be in the horizontal direction. The instrumentation system is capable of measuring the mass flow rate of particles in the vertical pipe with a relative error within ±6.5% regardless of the orientation of the sensing head over the mass flow rate from 7 to 25 kg/h and the particle velocity from 12 to 30 m/s, while on the horizontal pipe, the error is within 5.8% when the sensing head is installed with the waveguide in the horizontal direction under the same flow conditions.

Measurement of velocity and concentration profiles of pneumatically conveyed particles in a square-shaped pipe using electrostatic sensor arrays

Mathematical Modeling and Experimental Evaluation of Electrostatic Sensor Arrays for the Flow Measurement of Fine Particles in A Square-Shaped Pipe

Simultaneous Measurement of Electrostatic Charge and Its Effect on Particle Motions by Electrostatic Sensors Array in Gas-Solid Fluidized Beds

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Characterization of electrostatic sensors for flow measurement of particulate solids in square-shaped pneumatic conveying pipelines

Acoustic Analysis of Particle–Wall Interaction and Detection of Particle Mass Flow Rate in Vertical Pneumatic Conveying

Online Measurement of Particle Charge Density in A Gas-Solid Bubbling Fluidized Bed Through Electrostatic and Pressure Sensing

Homogenization of the Spatial Sensitivity of Electrostatic Sensors for the Flow Measurement of Pneumatically Conveyed Solids in a Square-Shaped Pipe

New Contactless Velocity Measurement Sensor for Bubble/Slug Flow in Small Scale Pipes.

Characterization of Electrohydrodynamic Flow in a Plate-Plate Electrostatic Precipitator with a Wire-Cylinder Pre-Charger by Data-Driven Vortex and Residence Time Analysis

A new method for the velocity measurement of gas-liquid two-phase flow

Mass-Flow-Rate Measurement of Pneumatically Conveyed Particles Through Acoustic Emission Detection and Electrostatic Sensing

A Comparative Study of Induced and Transferred Charges for Mass Flow Rate Measurement of Pneumatically Conveyed Particles

Identification methods of charged particles based on aero-engine exhaust gas electrostatic sensor array

Measurement of Flow Parameters in a Bubbling Fluidized Bed Using Electrostatic Sensor Arrays

CFD–DEM Simulation of Pneumatic Conveying in a Horizontal Channel

Measurement and Analysis of Flow Regimes Transition by Acoustic and Electrostatic Signals in Vertical Pneumatic Conveying

Particle velocity measurement in gas/solid two-phase flow through adaptive filtering

Acoustic Emission Detection of Particle Movement in A Cross-Flow Moving Bed

Online Measurement of the Size Distribution of Pneumatically Conveyed Particles Through Acoustic Emission Detection and Triboelectric Sensing.

Simulation Studies on the On-Line Concurrent Measurement of Velocity and Size Distribution of Pneumatically Conveyed Particles Through Digital Imaging