Abstract:In this article, a novel waveguide-to-microstrip transition with a built-in dc/IF return path is proposed, in which a traditional E- plane probe is directly connected to the backshort by a thin metal wire along the axis of the waveguide. The proposed waveguide-to-microstrip transition implements an additional dc/IF return path while realizing mode conversion. Moreover, the presence of the dc/IF return path has little influence on the performance of the original E- plane probe. The operating principle is analyzed by theoretical analysis and full-wave simulation, and the design procedure of the transition is also presented. To implement the proposed dc/IF return path on different substrates, two approaches, including direct integration with planar circuits or with wire bonding technology, are developed. Furthermore, two back-to-back transition prototypes working in the millimeter and submillimeter bands were designed and characterized. The measured results are in excellent agreement with the simulations. Finally, as an application example, a 70-/140-GHz unbalanced frequency doubler adopting this structure for both dc biasing and dc grounding was designed and fabricated. Measured results show that the conversion loss of the fabricated doubler is less than 13 dB in the range from 125 to 145 GHz, and the minimum conversion loss is 11 dB at 140 GHz with 100-mW input power.

Compact Corrugated Plate for Double-Sided Contactless Waveguide Flange

Hard–Soft Groove Gap Waveguide Based on Perpendicularly Stacked Corrugated Metal Plates

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

Low-Cost Gap Waveguide Technology Using Shallow Grooves and Glide-Symmetric Semicircular-Holes EBG Structures

A Low-loss CPW-DWG-CPW Transition

Compact Coplanar Waveguide Low-Pass Filter Using a Novel Electromagnetic Bandgap Structure

A D-Band Self-Packaged Low Loss Grounded Coplanar Waveguide to Rectangular Waveguide Transition with Silicon-Based Air Cavity-Backed Structure

Efficient Coupling of Evanescent Waves in Rectangular Waveguides Based on Ultrathin Planar Capacitive Metasurfaces

Broadband ridge waveguide to rectangular waveguide transition design in D‐band

A D-Band GCPW to SIW to Air-Filled RWG Cavity-Backed Transition for Integration of Communication System

Design and Fabrication of a New Micromachined Interdigital Coplanar Waveguide

A W-band, Wideband, and Low-Loss Slot-Coupled Multi-Layer Transition with Compact Leakage-Suppressing Scheme

An Ultra-Broadband Conductor-Backed Coplanar Waveguide with Sine Edges

Dual-input Concave Diffraction Grating Demultiplexer Based on Dielectric Multidirectional Reflectors

Millimeter-Wave Waveguide-to-Microstrip Transition With a Built-In DC/IF Return Path

A Broadband High-Gain and Low-Sidelobe CTS Array Covering Entire W-Band Based on Stacked Parallel Plate Gap Waveguide

New Micromachined Interdigital Coplanar Waveguide

Slow Wave Gap Waveguide With Bandpass Filtering Functionality

A Novel Waveguide-to-Coaxial Transition with Embedded Magnetic Closed Loop

Broadband Contactless 90° Waveguide Transition with a U-Shaped Choke Groove