An experimental study of tonal noise from a wind turbine airfoil with flat plate serrations

Huijing Cao,Teng Zhou,Liangwen Qi,Mingming Zhang

DOI: https://doi.org/10.1016/j.apacoust.2022.108664

IF: 3.614

2022-03-01

Applied Acoustics

Abstract:An experimental study was conducted to investigate acoustic effects of flat plate trailing-edge serrations on a DU 21 wind turbine airfoil. All measurements were performed under the chord-base Reynolds number of 1.32 × 10 5 , and the tested angle of attack varied from 0° to 12°. An arc array consisting of 10 free-field microphones was used to acquire the far-field noise signal, and the particle image velocimetry was employed to visualize the flow field near the airfoil trailing edge (TE). For the baseline airfoil, discrete tones are detected when the angle of attack is larger than 3°, and the generation of tones is attributed to the large-scaled coherent structure shed from the suction side. With the presence of serrations, the formation of the vortex structure on the suction side is inhibited by the upwash flow at the serration root. As a result of that, the tones are effectively suppressed by the serration, leading to a broadband nature of the noise spectrum. The tonal noise reduction effect is more evident with larger angles of attack.

acoustics