Abstract:Aerospace structures often experience high strain rate events such as ballistic impact, crash, or crush. A material model has been developed that enhances the capability to simulate the dynamic response of composite materials under these loading conditions. The material model has been implemented into the commercially available transient dynamic finite element code LS-DYNA as MAT213. The model can simulate the nonlinear deformation, damage, and failure that takes place in a composite under dynamic loading conditions. The specific goal of this work is to characterize the MAT213 input for the representative material. The specific composite material being examined consists of T700G unidirectional carbon fibers and a low-melt PolyArylEtherKetone (LMPAEK) thermoplastic resin system. It is formally referred to as Toray TC1225 LMPAEK T700G. As the initial part of this work, this paper is focused on characterizing the material parameters for the MAT213 deformation model based on results obtained from multi-scale experimentation. The effort concentrated on characterizing the in-plane material response suitable for use with thin shell elements. For shell elements within MAT213, tabulated stress-strain results from tension and compression tests in the longitudinal and transverse directions and in-plane shear tests are required. Due to the difficulty of measuring small strains in the transverse direction, a multi-scale testing method was developed. Macro-scale testing is performed per the typical ASTM methods while micro-scale testing uses a microscope along with smaller coupon sizes to obtain the smaller strains in the transverse direction of each test. For both testing methods, a VIC-2D camera and software for digital image correlation analysis are used. Using the DIC combined with each test fixture, reliable stress and strain data are collected.

Physics-Based Multi-Scale Modeling of Shear Initiated Reactions in Energetic and Reactive Materials

Multiscale Fluid Mechanics and Modeling

A Coupled SPFEM/DEM Approach for Multiscale Modeling of Large‐deformation Geomechanical Problems

Modelling on Shock-Induced Energy Release Behavior of Reactive Materials considering Mechanical-Thermal-Chemical Coupled Effect

Multiscale Simulation of the Responses of Discrete Nanostructures to Extreme Loading Conditions Based on the Material Point Method

Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials

Micromechanics-based multi-scale framework with strain-rate effects for the simulation of ballistic impact on composite laminates

Multiscale Modeling of Shock Wave Localization in Porous Energetic Material

A unified discontinuous Galerkin formulation for interfacial multiphysics modeling of thermo-chemically driven fracture

Mechano-kinetic coupling approach for materials with dynamic internal structure

A user material approach for the solution of multi-field problems in Abaqus: Theoretical foundations, gradient-enhanced damage mechanics and thermo-mechanical coupling

A particle-based multiscale simulation procedure within the material point method framework

Multi-Scale Experimental Characterization for LS-DYNA MAT213 Modeling of Composite Structures under High Strain Rate

Deep Learning for Multiscale Damage Analysis via Physics-Informed Recurrent Neural Network

A micro-macro coupling approach of MD-SPH method for reactive energetic materials

Use of effective multiscale cohesive models in the simulation of spall in metal plates

Multiphysical Modeling and a Transscale Computation of Composite Materials and Their Interfaces

Experimental Characterization of Non-Associative Plasticity Flow Rule Coefficients for the LS-DYNA MAT213 Model

Multiscale modeling of interface-mediated mechanical, thermal, and mass transport in heterogeneous materials: Perspectives and applications

Hierarchical multiscale fracture modeling of carbon-nitride nanosheet reinforced composites by combining cohesive phase-field and molecular dynamics