Abstract:The reference ion cyclotron resonance frequency (ICRF) heating schemes for ITER deuterium–tritium (D-T) plasmas at the full magnetic field of 5.3 T are second harmonic heating of T and 3 He minority heating. The wave-particle resonance location for these schemes coincide and are central at a wave frequency of 53 MHz at 5.3 T. Experiments have been carried out in the second major D-T campaign (DTE2) at JET, and in its prior D campaigns, to integrate these ICRF scenarios in JET high-performance plasmas and to compare their performance with the commonly used hydrogen (H) minority heating. In 50:50 D:T plasmas, up to 35% and 5% larger fusion power and diamagnetic energy content, respectively, were obtained with second harmonic heating of T as compared to H minority heating at comparable total input powers and gas injection rates. The core ion temperature was up to 30% and 20% higher with second harmonic T and 3 He minority heating, respectively, with respect to H minority heating. These are favourable results for the use of these scenarios in ITER and future fusion reactors. According to modelling, adding ICRF heating to neutral beam injection using D and T beams resulted in a 10%–20% increase of on-axis bulk ion heating in the D-T plasmas due to its localisation in the plasma core. Central power deposition was confirmed with the break-in-slope and fast Fourier transform analysis of ion and electron temperature in response to ICRF modulation. The tail temperature of fast ICRF-accelerated tritons, their enhancement of the fusion yield and time behaviour as measured by an upgraded magnetic proton recoil spectrometer and neutral particle analyser were found in agreement with theoretical predictions. No losses of ICRF-accelerated ions were observed by fast ion detectors, which was as expected given the high plasma density of n e ≈ 7–8 × 10 19 m −3 in the main heating phase that limited the formation of ICRF-accelerated fast ion tails. 3 He was introduced in the machine by 3 He gas injection, and the 3 He concentration was measured by a high-resolution optical penning gauge in the sub-divertor region. The DTE2 experiments with 3 He minority heating were carried with a low 3 He concentration in the range of 2%–4% given the fact that the highest neutron rates with 3 He minority heating in D plasmas were obtained at low 3 He concentrations of ∼2%, which also coincided with the highest plasma diamagnetic energy content. In addition to 3 He introduced by 3 He gas injection, an intrinsic concentration of 3 He of the order of 0.2%–0.4% was measured in D-T plasmas before 3 He was introduced in the device, which is attributed to the radioactive decay of tritium to 3 He. According to modelling, even such low intrinsic concentrations of 3 He lead to significant changes in ICRF power partitioning during second harmonic heating of T due to absorption of up to 30% of the wave power by 3 He.

COREDIV simulations of D and D-T high current-high power Baseline pulses in JET-ITER Like Wall

Impurity behaviour in JET high-current baseline scenario for Deuterium, Tritium and Deuterium-Tritium plasmas

Power and isotope effects in the ITER Baseline Scenario with tungsten and tungsten-equivalent radiators in DIII-D

First principle-based multi-channel integrated modelling in support of the design of the Divertor Tokamak Test facility

Experiments in high-performance JET plasmas in preparation of second harmonic ICRF heating of tritium in ITER

First tungsten radiation studies in DIII-D's ITER baseline demonstration discharges

Simulations of the stationary Q=10 and the exit phase from the flat-top of an ITER 15MA baseline scenario Predictive JINTRAC simulations with consistent treatment of D and T in the whole plasma

ICRH-related impurity source and control across experiments in H, D, T plasmas at JET-ILW

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

Overview of T and D-T results in JET with ITER-like Wall

Power Balance Investigation in Long-Pulse High-Performance Discharges with ITER-like Tungsten Divertor on EAST

Overview of D-T Results from TFTR

Radiation induced non-linear oscillations in ITER baseline scenario plasmas in DIII-D

Physics of High Performance Deuterium-Tritium Plasmas in Tftr

Compatibility of divertor detachment and ELM suppression in DIII-D high-βp plasmas with ITER-similar shape

Recent progress in L-H transition studies at JET: Tritium, Helium, Hydrogen and Deuterium

First integrated core-edge fluid simulation of ITER's Limiter–Divertor transition with SolEdge-HDG

Stable Deuterium-Tritium burning plasmas with improved confinement in the presence of energetic-ion instabilities

Kinetic modeling of the plasma-wall interaction in the DTT divertor region

Time-dependent full-radius integrated modeling of the DTT tokamak main plasma scenarios

3D radiated power analysis of JET SPI discharges using the Emis3D forward modeling tool