Abstract:Purpose With the development of automation technology, the accuracy, bearing capacity and self-adaptation requirements of wheeled mobile robots are more and more demanding under various complex conditions, which will urge designers such shortcomings as the low accuracy, poor flexibility and weak obstacle crossing ability of traditional heavy haul vehicles and improve the wear resistance and bearing capacity of traditional omnidirectional wheels. Design/methodology/approach The optimal configuration for heavy payload transportation is obtained by building sliding friction consumption model of traditional wheels with different driving types based on Hertz tangential contact theory. The heavy payload omnidirectional wheel with a double-wheel steering and a coupled differential wheel driving is designed with the optimal configuration. The wheel consists of a differential gear train unit and a nonindependent suspension unit. Kinematics model of the wheel is established and relative parameters are optimized. Findings The prototype experiments show that the wheel has higher motion accuracy and environment adaptability. The results are consistent with the theoretical calculation, which show that the accuracy is more than 50% higher than that of differential prototype. The motion stability and the accuracy of the coupled differential omnidirectional wheel are better than those of the traditional omnidirectional wheels during the moving and obstacle crossing process under complex conditions, which verifies the correctness and advantages of the design. Originality/value Aiming at the specific application of heavy payload omnidirectional transportation, a new omnidirectional mobile mechanism with a two-wheel coupling drive structure and an adaptive mechanism is proposed. The simulation and experimental results show that it can realize the high-precision heavy-load omnidirectional movement, the effective contact with the ground and improve the adaptability to the rugged ground. It is flexible, simple and modular and can be widely applied to transportation, exploration, detection and other related industrial fields.

Optimizing Precision Material Handling: Elevating Performance and Safety through Enhanced Motion Control in Industrial Forklifts

Quasi-Time-Optimal Model Predictive Control Technology for Autonomous Pallet Picking

Liberating Humanity from Heavy Labor: Dual-Arm Coordination and Teleoperation Control for an Assistive Robot

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Efficient Navigation and Motion Control for Autonomous Forklifts in Smart Warehouses: LSPB Trajectory Planning and MPC Implementation

Fuzzy and Proportional Controls for Driving Control of Forklift AGV

Advanced Synchronization Control of a Dual-Linear-Motor-Driven Gantry with Rotational Dynamics.

A Human-Like Dual-Forklift Collaborative Mechanism for Container Handling

Design and simulation of eco-friendly smartphone controlled forklift

Design, Control and Implementation of an Intelligent Material Handling Robot

Innovative Design of the Lifting Mechanisms for Forklift Trucks

A Novel Dual-Arm Adaptive Cooperative Control Framework for Carrying Variable Loads and Active Anti-Overturning

A Master-Slave Separate Parallel Intelligent Mobile Robot Used for Autonomous Pallet Transportation

Hierarchical Optimization-based Control for Whole-body Loco-manipulation of Heavy Objects

Design and Implementation of an Integrated Control System for Omnidirectional Mobile Robots in Industrial Logistics

A General Mobile Manipulator Automation Framework for Flexible Manufacturing in Hostile Industrial Environments

Toward Control of Wheeled Humanoid Robots with Unknown Payloads: Equilibrium Point Estimation via Real-to-Sim Adaptation

A Model Predictive Approach for Online Mobile Manipulation of Nonholonomic Objects using Learned Dynamics

Design and performance analysis of an adaptive omnidirectional wheel for heavy payload robot

Robust Adaptive Control of a Bimanual 3T1R Parallel Robot with Gray-Box-Model and Prescribed Performance Function

Design and Analysis of a Remotely Operated Mini Forklift Bot