One-step fabrication of the wear-resistant superhydrophobic structure on SiCp/Al composite surface by WEDM

Zhi Chen,Zhaojun Yan,Hongbing Zhou,Fenglin Han,Linhe Zhao,Hongzhi Yan

DOI: https://doi.org/10.1016/j.surfcoat.2021.126876

IF: 4.865

2021-03-01

Surface and Coatings Technology

Abstract:Fabricating superhydrophobic structure on metal matrix can significantly improve its usability, such as anti-corrosion, self-cleaning, anti-icing, fluid drag reduction. However, the mechanical strength and wear resistance of the micro-nano structures on the common material (such as plastic/ copper/ aluminum/ stainless steel) are not satisfactory. This paper aims to propose a high-efficiency and easy-operating method for fabricating wear-resistant superhydrophobic structure. Particle reinforced metal matrix composite (SiCp/Al) is chosen as workpiece material which has high specific strength, good wear resistance and low thermal expansion coefficient. A method of one-step fabricating multi-stage micro-nano structures for superhydrophobic structure on SiCp/Al composite surface using wire electrical discharge machining (WEDM) is presented. The primary structure and secondary structure are respectively semicircular groove texture and the surface microstructure from discharge machining. A set of cutting experiments are conducted to analyze the effect of the size of semicircular groove texture on the contact angle (CA) of workpiece surface. The multi-stage micro-nano structures on SiCp/Al composite surface is characterized by optical microscope, SEM, EDS. The experimental data shows that the maximum CA reaches 153.3° when the radius and center distance of semicircular groove texture are 400 μm and 700 μm, respectively. In addition, the superhydrophobic structure on SiCp/Al composite surface by WEDM exhibits excellent wear resistance. Eventually, the theoretical model of CA and the design criterion of semicircular groove texture for superhydrophobic structure are established. Specifically, the superhydrophobic structure can be obtained if the fraction of the solid-liquid area of the total projected surface area is lower than 0.084.

physics, applied,materials science, coatings & films

What problem does this paper attempt to address?

The paper aims to address the issue of fabricating wear-resistant superhydrophobic structures on metal substrates. Specifically, the goal of the paper is to propose an efficient and easy-to-operate method for preparing wear-resistant superhydrophobic structures. Traditional micro-nano structures do not exhibit ideal mechanical strength and wear resistance on common materials such as plastic, copper, aluminum, and stainless steel. This paper selects SiC particle-reinforced aluminum matrix composites (SiCp/Al composites) as the workpiece material because of their high specific strength, good wear resistance, and low thermal expansion coefficient. The study employs the Wire Electrical Discharge Machining (WEDM) method to fabricate multiscale micro-nano structures on the surface of SiCp/Al composites in one step to form superhydrophobic structures. Additionally, the paper establishes a theoretical model of the contact angle and design guidelines for semicircular groove textures, and verifies the wear resistance of the prepared superhydrophobic structures.

One-step fabrication of the wear-resistant superhydrophobic structure on SiCp/Al composite surface by WEDM

A High-Efficiency Preparation Method of Super Wear-Resistant Superhydrophobic Surface with Hierarchical Structure Using Wire Electrical Discharge Machining

Surface modification of aluminum alloy by wire electrical discharge machining with SiC nanofluid dielectric

Robust Ni/WC superhydrophobic surfaces by electrodeposition

Achieving of Bionic Super-Hydrophobicity by Electrodepositing Nano-Ni-pyramids on the Picosecond Laser-Ablated Micro-Cu-cone Surface

Coating-Free Superhydrophobic Hard Surfaces by Electric Discharge Machining with a Magnetic-Assisted Self-Assembly Sheet Electrode

Metallic Hierarchical Structures Uniformly Covered with WC@PDMS Composite Coatings Toward Comprehensively Durable Superhydrophobic Surfaces

Construction of superhydrophobic tungsten carbide via laser processing and its thermal, chemical and mechanical properties

Controllable preparation of wear-resistant superhydrophobic surfaces fabricated with square column microstructures

Machining characteristics of 65 vol.% SiCp/Al composite in micro-WEDM

Facile Preparation of Robust Superamphiphobic Surface by Electrochemical Etching Process Based on the SiC/Al Composites

A New Wire Electrode for Improving the Machining Characteristics of High-Volume Fraction SiCp/Al Composite in WEDM

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Facile Design and Fabrication of Superwetting Surfaces with Excellent Wear-Resistance

Theoretical and experimental investigation on superhydrophobic structure fabricated by femtosecond laser on alumina ceramics

Preparation of a Wear-Resistant, Superhydrophobic SiO2/Polymethyl Methacrylate Composite Coating on Aluminum Surface Processed with Nanosecond Laser

Micropatterned Amorphous Zr-Based Alloys Coated with Silica Nanoparticles as Superhydrophobic Surfaces against Abrasion

Superhydrophobic Composite Coating with Excellent Mechanical Durability

Study of wettability transition on hierarchical structured aluminum cut by wire electric discharge machining

Fabrication of a Highly Stable Superhydrophobic Surface with Dual-Scale Structure and Its Antifrosting Properties

Analysis and Optimization of the Machining Characteristics of High-Volume Content SiCp/Al Composite in Wire Electrical Discharge Machining