Abstract:PurposeThis paper presents a back-stepping sliding mode control method for vehicle suspension system with magnetorheological damper to obtain both the true nominal optimal suspension performance and better robustness. Through the study of control method, the acceleration of sprung mass is reduced, that is, the vertical vibration of vehicle is suppressed.MethodsA back-stepping sliding mode controller based on the establishment of the quarter-body MR suspension dynamic model, and it used the approximateskyhook-damping system as the reference model. The error dynamic equation is obtained through the MR suspension model and the reference model, and the error dynamic component is used as the back-stepping control parameter. On the premise of ensuring the system is asymptotically stable, adding the sliding mode surface to the dynamic equation of the third error subsystem can complete design of the back-stepping sliding mode controller. By constructing a magnetorheological damper experimental platform and then collecting the measured data, the improving hyperbolic tangent model of MR damper is presented. Furthermore, the Particle Swarm Optimization (PSO) method is proposed to find the improving hyperbolic tangent model’s optimal parameters to get the MR damper models.ResultsThe proposed semi-active suspension control system is rigorously proven to be input-to-state stable by virtue of Lyapunov stability theory. Through the simulation and experimental verification, it is proved that back-stepping sliding mode controller can reduce the acceleration of the sprung mass, that is, suppress the vertical vibration of the vehicle. At the same time, it is proved that the forward and inverse model of MR damper is effective, and can be applied to the hardware in the loop control experiment.ConclusionThe back-stepping sliding mode proposed in this paper is better than the seat suspension under other control and passive systems, which proves that the back-stepping sliding mode controller is effective. It also shows that the forward and inverse model of MR damper is effective.

Vibration control enhancement in a full vehicle dynamic model by optimization of the controller's gain parameters

Adaptive control of a vehicle-seat-human coupled model using quasi-zero-stiffness vibration isolator as seat suspension

Optimal Control of an Active Suspension System Applying Distributed Parameter Simulation Test

Parameter Optimization and Analysis of a Vehicle Suspension System Controlled by Magnetorheological Fluid Dampers

Multi-objective Optimization of Active Dry Friction Damper-Rotor Systems Based on Predictive Control

Improving the ride comfort of full car model with a decoupling intelligent model free controller

Global optimization control for nonlinear full‐car active suspension system with multi‐performances

Vehicle Stability Analysis under Extreme Operating Conditions Based on LQR Control

LMI-based robust model predictive control for a quarter car with series active variable geometry suspension

The double-delay reducing vibration control for five-degree-of-freedom half-vehicle model in idle condition

Multi-objective Control of Vehicle Active Suspension Systems Via Load-Dependent Controllers

Robust finite frequency H∞ control of active suspension based on gain scheduling

Time-Delay Vibration Reduction Control of 3-DOF Vehicle Model with Vehicle Seat

Road disturbances rejection of a semi-active vehicle suspension

Back-Stepping Sliding Mode Controller Design for Vehicle Seat Vibration Suppression Using Magnetorheological Damper

A new hybrid control strategy for improving ride comfort on lateral suspension system of railway vehicle

Application of hybrid control algorithm on the vehicle active suspension system to reduce vibrations

LQR force command planning–based sliding mode control for active suspension system

An Optimization Algorithm of Time-Delayed Feedback Control Parameters for Quarter Vehicle Semiactive Suspension System

Analysis and semi-active control of rigid-flexible coupled system on vehicle

Optimal nonlinear polynomial control of a quarter-vehicle suspension system under harmonic and random road excitations