Abstract:In order to realize the effective monitoring of the spatial stress state of the underground rock formation and its variation.A monitoring method combining plane strain and fiber grating sensing technology was proposed,based on the principle of fiber grating sensing and plane stress state meas-urement.The strain sensor unit was composed of two sets of strain sensor,which were composed of two sets of right angle strain flower and a group of equiaxed strain flower.The three sets of strain flowers were placed in three cylindrical shapes respectively by using carbon fiber laminated composite material.On the probe S1,S2,S3,the three probes were connected with a certain mechanical structure to form the three-dimensional geo-stress sensor of the formation space stress monitoring.The experi-ment of temperature and stress of the fiber strain sensor was carried out,and the stress sensing exper-iment of the whole sensing device was carried out indoors.Experimental results showed that the stress resolution of the fiber strain sensor was 0.017 2 MPa;stress monitoring range of 0-60 MPa;the av-erage error of the maximum principal stress of the probe S1 was 16 .31% , the average error of the maximum principal stress of the probe S2 is 24 .36% ,and the absolute error of the S3 probe was 0 .006 8 MPa .The mean value of the stress space angle error measured by the actual loading stress and the sensor was 1 .24 ° .The monitoring results of the sensor are consistent with the variation of the actual loading stress , which can meet the requirement of continuous monitoring of the spatialstress state of the underground rock.

FBG-LPFG-based Sensor To Monitor 3D Strain In Ice During Freezing-melting Processes

Six-Dimensional Strain Sensor Based on Fiber Bragg Gratings for Frozen Soil

3-Dimensional Strain Sensor in Fiber Bragg Grating

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Design and Analysis of a Combined FBG Sensor for the Measurement of Three Parameters.

Large-Scale Strain Measurement of Micro-Specimens in High-Temperature Environments Based on Efpi

Ice structure monitoring with an optical fiber sensing system

Design and Application of the Ice Force Sensor Based on Fiber Bragg Grating

A Study of Tensile and Fatigue Loading Effects on the Performance of Metal-Packaged FBG Strain Sensor Developed for Cryogenic Applications

Uniaxial Compressive Strength and Fracture Mode of Lake Ice at Moderate Strain Rates Based on a Digital Speckle Correlation Method for Deformation Measurement

A Study on Ice-Pressure Sensor Based on Dual FBGs

Three Dimensional In-Situ Stress Sensor Based on Optical Fiber Sensing Technology

3-Dimensional Fiber Bragg Grating Strain and Displacement Sensing System Based on a Cylinder Structure

Strain and Temperature Sensing Based on Different Temperature Coefficients fs-FBG Arrays for Intelligent Buoyancy Materials

Three-dimensional surface strain sensor based on LIG/PDMS composite film with adjustable electromechanical performance

Research of Concrete Residual Strains Monitoring Based on WLI and FBG Following Exposure to Freeze–thaw Tests

A Novel Ice-Pressure Sensor Based on Dual FBGs

Coupled surface-internal deformation monitoring in three-dimensional space for freezing-thawing soil

Frost heaving strain monitoring for lining structure in extreme cold and high-altitude area with FBG strain sensors