Abstract:Fault location is one of the main challenges in the distribution network due to its expanse and complexity. Today, with the advent of phasor measurement units (PMU), various techniques for fault location using these devices have been proposed. In this research, distribution network fault location is defined as an optimization problem, and the network fault location is determined by solving it. This is done by combining PMU data before and after the fault with the power system status estimation (PSSE) problem. Two new objective functions are designed to identify the faulty section and fault location based on calculating the voltage difference between the two ends of the grid lines. In the proposed algorithm, the purpose of combining the PMU in the PSSE problem is to estimate the voltage and current quantities at the branch point and the total network nodes after the fault occurs. Branch point quantities are calculated using the PMU and the governing equations of the π line model for each network section, and the faulty section is identified based on a comparison of the resulting values. The advantages of the proposed algorithm include simplicity, step-by-step implementation, efficiency in conditions of different branch specifications, application for various types of faults including short-circuit and series, and its optimal accuracy compared to other methods. Finally, the proposed algorithm has been implemented on the IEEE 123-node distribution feeder and its performance has been evaluated for changes in various factors including fault resistance, type of fault, angle of occurrence of a fault, uncertainty in loading states, and PMU measurement error. The results show the appropriate accuracy of the proposed algorithm showing that it was able to determine the location of the fault with a maximum error of 1.21% at a maximum time of 23.87 s.

Wide-Area Fault Location in Transmission Power System Considering Measurement Uncertainty

PMU-Based Fault Location Using Voltage Measurements in Large Transmission Networks

Transmission network fault location using sparse PMU measurements

An Efficient PMU-Based Fault-Location Technique for Multiterminal Transmission Lines

Optimal PMU Placement Approach for Power Systems Considering Non-Gaussian Measurement Noise Statistics

Fault Location in Distribution Network by Solving the Optimization Problem Based on Power System Status Estimation Using the PMU

A new fault location algorithm based on fault component from finite synchronized phasor measurement unit

Wide-area measurement system based power load modeling

Network Parameter Identification and Estimation Based on Hybrid Measurement of WAMS/SCADA

Optimum Placement of Phasor Measurement Units in Power Systems.

Research on Fault Location Based on Dynamic Synchronous Phasor Measurement by PMU

Novel Fault Locating Method Based on Synchronized Voltage Phasor

A Two-Terminal Fault Location Algorithm Using Asynchronous Phasors Based on Distributed Parameter Model

Wide Area Measurements Based Analytic Model for Power System Fault Diagnosis

Wide-area measurement system-based supervision of protection schemes with minimum number of phasor measurement units

Wide-Area Backup Protection Against Asymmetrical Faults Using Available Phasor Measurements

Detecting the Location of Short-Circuit Faults in Active Distribution Network Using PMU-Based State Estimation

Optimal PMU Placement to Guarantee Observability under N-1 Condition

Reliability Evaluation of Phasor Measurement Unit Considering Failure of Hardware and Software Using Fuzzy Approach

A distributed multi-area power system state estimation method based on generalized loss function

Wide-Area Real-Time Dynamic State Estimation Method Based on Hybrid SCADA/PMU Measurements