Abstract:This study proposed plastic waste-fueled Chemical-looping Hydrogen Production (CLHP) based on the concept of three-reactor chemical-looping process for the purposes of sustainable treatment of plastic wastes while producing high purity H2 and separating CO2. Oxygen carrier prepared from red mud wastes (Bauxite residues) was suggested to be circulating materials to improve combustion efficiency and H2 yield. The feasibility of using pelletized oxygen carrier prepared from red mud wastes was experimentally investigated with major components (H2, CH4 and C2H4) of plastics pyrolysis gases as fuels. The red mud oxygen carrier composed of around 38 wt% Fe2O3 and 50 wt% inert materials, and CuO-promoted oxygen carriers composed of 8.0 wt% CuO and 92 wt% red mud wastes were used. The two oxygen carriers were examined by parallel experiments, focusing on the aspects of oxygen transport, stability, hydrogen productivity and carbon deposition. Temperature and different components of plastic pyrolysis gases had significant impacts on oxygen transport behaviors; reduction tests using CH4 or C2H4 fuels suggested that the operation temperature of Fuel Reactor should be higher than 800 °C for deep reduction and high H2 productivity. CuO addition significantly promoted oxygen carrier's reactivity and oxygen transport capacity with various fuel components. The cyclic CLHP experiments, performed over 10 redox cycles with C2H4 as fuels, showed that there was only a limited degradation in oxygen carriers caused by carbon deposition and element migration. The developed oxygen carriers can meet the requirements of long-term operation for CLHP process. Carbon deposition on the oxygen carriers derived from hydrocarbon fuel cracking seemed to be inevitable, which experimentally determined in the range of 0.01–0.043 g g−1 oxygen carriers as C2H4 was used as fuels. However, the reactivity of these carbon deposits was extremely low; their initial steam-gasification temperatures were around 750 °C, much higher than the temperature used for water splitting reaction. This provides the potential opportunities for an industrial CLHP process to produce high purity H2 (>97%) despite of carbon deposits presents in Fuel Reactor.

Investigations on oxygen carriers derived from natural ores or industrial solid wastes for chemical looping hydrogen generation using biomass pyrolysis gas

Industrial-Scale Preparation of Biore Oxygen Carriers for Chemical Looping Combustion via a Hydroforming Method

Chemical looping gasification of biomass using rare earth oxides doped ferric oxide oxygen carrier for hydrogen‐rich syngas production

Redox reactivity evaluation of cement chemically and physically bonded hematite oxygen carrier during biomass chemical looping gasification

Performance evaluation of rare earth (La, Ce and Y) modified CoFe2O4 oxygen carriers in chemical looping hydrogen generation from hydrogen-rich syngas

Renewable hydrogen production from chemical looping steam reforming of biodiesel byproduct glycerol by mesoporous oxygen carriers

Performance of red mud oxygen carriers in chemical-looping hydrogen production using different components of plastic waste pyrolytic gas

Chemical looping reforming of biomass based pyrolysis gas coupling with chemical looping hydrogen by using Fe/Ni/Al oxygen carriers derived from LDH precursors

Inexpensive composite copper ore/red mud oxygen carrier: Industrial granulation via hydroforming and multiple-cycle evaluation in chemical looping combustion

Red Mud-Based Perovskite Oxygen Carrier Preparation for Chemical Looping Gasification of Municipal Sludge.

Utilizing high entropy oxide (Ni0.2Co0.2Ca0.2Cu0.2Mg0.2)Fe2O4 in chemical looping process for highly efficient and stable hydrogen production

Performance of Ceo2-Modified Iron-Based Oxygen Carrier in the Chemical Looping Hydrogen Generation Process

High-purity hydrogen production from real biomass pyrolysis vapors via a chemical looping process

Hydrogen-rich syngas production with tar elimination via biomass chemical looping gasification (BCLG) using BaFe2O4/Al2O3 as oxygen carrier

Long-term coal chemical looping gasification using a bimetallic oxygen carrier of natural hematite and copper ore

Effect of hierarchical pore structure of oxygen carrier on the performance of biomass chemical looping hydrogen generation

Reactivity investigation on chemical looping gasification of coal with Iron-Manganese based oxygen carrier

Uniformly dispersed NiFeAlO 4 as oxygen carrier for chemical looping steam methane reforming to produce syngas

Identifying the roles of MFe2O4 (M=Cu, Ba, Ni, and Co) in the chemical looping reforming of char, pyrolysis gas and tar resulting from biomass pyrolysis

Chemical looping hydrogen production with modified iron ore as oxygen carriers using biomass pyrolysis gas as fuel

Use of Heavy Fraction of Bio-Oil As Fuel for Hydrogen Production in Iron-Based Chemical Looping Process