Abstract:Dendrites form on the surface of metal electrodes as a battery undergoes repeated charging and discharging. The formation of dendrites not only affects the electrochemical performances of a battery but may also cause internal short-circuiting and thermal runaway events. Hence, there is a clear need to understand the formation mechanisms and growth kinetics of dendrites. Currently available technologies such as (in-situ) X-ray computed tomography and scanning electron microscopy can be used in a laboratory environment to study dendrite formation. However, they are often prohibitively expensive or unsuitable for long-term, large-scale, and in-operando monitoring. In this study we present an ultrasound-based technique which is cheap, with potential to scale up, and suitable in both laboratory and industrial environments. Different from conventional ultrasonic approaches which excite ultrasonic waves that propagating through layers of cathode, anode and electrolyte, the method presented in this study utilises miniature transducers which excite fundamental shear-horizontal (SH0*) guided ultrasonic waves that propagate along the cathode and anode. Hence, the presented method can individually monitor the condition of multiple electrodes which may be undergoing different ion-insertion mechanisms. A proof-of-concept study was performed on a symmetric aqueous zinc ion cell to explore the sensitivity of SH0* mode guided ultrasonic waves to zinc metal plating/stripping and dendrite formation at the electrode-electrolyte interface. We observed that the attenuation and velocity of waves show cyclical variations when the cell was in a chronopotentiometric cycling test. Variations of wave attenuation and velocity on the opposing working and counter electrode are observed to be in the opposite senses and the increasing/decreasing trends depend on the states (i.e., charging/discharging) of the cell. The cyclical variations of the ultrasound properties are only partially reversible and a monotonic drift can be observed which increases with increasing number of cycles. Coupling the ultrasonic measurements with images acquired by an optical microscope, clear correlations can be observed between changes in ultrasonic wave properties and zinc dendrite thickness. The partially reversible cyclical variations can be attributed to zinc plating/stripping that occur at the electrode-electrolyte interface. The irreversible, monotonic drifting can be attributed to the growth of zinc dendrites on the electrode surface. Hence, these findings demonstrate that the SH0* mode guided ultrasonic waves can offer valuable insights on physical changes at the electrode-electrolyte interface. It is therefore possible to quantitatively model and predict dendrite growth based on ultrasonic measurements. In conclusion, we believe the presented method can inspire more quantitative research on dendrite formation and in-operando monitoring of battery health. Figure 1

Monitoring the Zn ion storage of Prussian blue analog via in situ spectral imaging strategy

Thioacetamide Additive Homogenizing Zn Deposition Revealed by In Situ Digital Holography for Advanced Zn Ion Batteries

Achieving Long-Life Prussian Blue Analogue Cathode for Na-ion Batteries Via Triple-Cation Lattice Substitution and Coordinated Water Capture

In Situ Visualization of Ion Transport Processes in Aqueous Batteries

Achieving Long-Cycle-Life Zinc-Ion Batteries through a Zincophilic Prussian Blue Analogue Interphase

In Situ Imaging of the Interfacial Processes Manipulated by Salt Concentration on Zinc Anodes in Zinc Metal Batteries

Synchrotron X-ray Characterization Techniques for the Development of Aqueous Zinc Ion Batteries

Research progress of Prussian blue and its analogues for cathode of aqueous zinc ion battery

(Digital Presentation) Monitoring Dendrite Growth in Aqueous Zinc Ion Batteries with Guided Ultrasonic Waves

Synchrotron X‐ray Characterization Techniques for the Development of Aqueous Zinc Ion Batteries

Operando monitoring of ion activities in aqueous batteries with plasmonic fiber-optic sensors

Dual ions intercalation drives high-performance aqueous Zn-ion storage on birnessite-type manganese oxides cathode

Prussian blue analogs cathodes for aqueous zinc ion batteries

Recent Advances in Zn‐Ion Batteries

In situ monitoring redox processes in energy storage using UV–Vis spectroscopy

In-situ Multimodal Imaging and Spectroscopy of Mg Electrodeposition at Electrode-Electrolyte Interfaces

Recent Progress on High‐Performance Cathode Materials for Zinc‐Ion Batteries

Insights into the Structure Stability of Prussian Blue for Aqueous Zinc Ion Batteries

Dual Ion Co‐insertion Induced Spontaneous and Reversible Phase Conversion Chemistry for Unprecedented Zn2+ Storage

A Photonic Hydrogel for Health Self-Monitoring of Solid-State Electrolytes in Zinc-Air Batteries

High-performance rechargeable aqueous zinc-iodine batteries via a dual strategy of microporous carbon nanotubes for cathodic iodine immobilization and modified separator