Abstract:Near -neutral zinc -air batteries show great promise for long -cycle applications in ambient air owing to their impressive deposition/stripping compatibility with zinc anodes and greater chemical stability towards CO2 in ambient air compared to batteries with traditional alkaline electrolytes. However, the inherent water volatilization of liquid electrolytes and the flexibility of electrolytes required for wearable devices severely limit the practical application of this system. In this study, a fumed SiO2- based composite hydrogel polymer electrolyte (SiO2-HPE) was prepared for application in near -neutral zinc -air batteries. The design of the SiO2-HPE was carried out considering the following three aspects. Firstly, it is widely acknowledged that the polyacrylamide polymer skeleton is beneficial to excellent ionic conductivity and the mechanical strength of the SiO2-HPE. Secondly, fumed SiO2 bearing multiple silicon hydroxyl groups is a suitable option as a water -retaining additive. Thirdly, the near -neutral liquid electrolyte (1 mol center dot kg-1 Zn(OTf)2) absorbed in the SiO2-HPE is stable towards CO2 in ambient air. In conclusion, these three aspects of the electrolyte design contribute to the practical application of the SiO2-HPE. Raman spectroscopy and scanning electron microscopy revealed that the synthesized SiO2-HPE exhibited a high degree of polymerization, plentiful surface pores, and a uniform distribution of elements. According to the infrared and Raman spectra, the abundant hydroxyl groups located on the surface of the SiO2 particles enhanced water molecule binding by altering the hydrogen bond network within the SiO2-HPE. This conclusion was further confirmed by thermogravimetry and differential scanning calorimetry. After exposure to ambient air (30% relative humidity) for 96 h, the SiO2-HPE exhibited a water retention capacity of 49.52%, which is 6.23% and 1.73% higher than those for 1 mol center dot kg-1 Zn(OTf)2 and the HPE (hydrogel polymer electrolyte without SiO2). Moreover, owing to the dynamic recombination of the hydrogen bonds between the silicon hydroxyl groups and the gel skeleton, SiO2-HPE exhibited a higher mechanical strength and modulus than HPE under tensile and compressive conditions, respectively. This further rendered it an ideal electrolyte for flexible zinc -air batteries. The near -neutral zinc -air battery assembled with the SiO2-HPE exhibited a cycle life of up to 200 h under 30% relative humidity, far exceeding those of 1 mol center dot kg-1 Zn(OTf)2 and the HPE. Based on such remarkable performance, the flexible near -neutral zinc -air battery device assembled by the SiO2-HPE has shown a satisfactory performance under special conditions, such as bending and cutting, and can be used as a power supply for different electronic devices, making it a promising next -generation electrochemical energy storage device. Overall, this work provides new insight into the development of flexible zinc -air battery devices with long-term stability in ambient air.

A Photonic Hydrogel for Health Self-Monitoring of Solid-State Electrolytes in Zinc-Air Batteries

A Hydrogel Electrolyte Toward a Flexible Zinc-Ion Battery and Multifunctional Health Monitoring Electronics.

Alkaline Double-Network Hydrogels with High Conductivities, Superior Mechanical Performances, and Antifreezing Properties for Solid-State Zinc-Air Batteries

Alkaline Double-Network Hydrogels with High Conductivity, Superior Mechanical Performance and Anti-Freezing Property for Solid-State Zinc-Air Batteries.

A Hydrogel Electrolyte with High Adaptability over a Wide Temperature Range and Mechanical Stress for Long-Life Flexible Zinc-Ion Batteries

Zwitterionic Hydrogels with High Interfacial Affinity for Zinc Metal Batteries

Rationally Engineering a Quasi-Solid-State Flexible Self-Healing Secondary Battery Using Hydrogel-Based Water-in-Salt Electrolyte and Electrochemically Deposited Electrodes

Molecular Bridging Induced Anti-salting-out Effect Enabling High Ionic Conductive ZnSO4-based Hydrogel for Quasi-solid-state Zinc Ion Batteries

Hierarchically‐Structured and Mechanically‐Robust Hydrogel Electrolytes for Flexible Zinc‐Iodine Batteries

Self-Healing and Anti-CO 2 Hydrogels for Flexible Solid-State Zinc-Air Batteries

Mussel-Inspired, Hydrophobic Association-Regulated Hydrogel Electrolytes with Super-Adhesive and Self-Healing Properties for Durable and Flexible Zinc-Ion Batteries

Flexible Hydrogel Electrolyte with Superior Mechanical Properties Based on Poly(vinyl Alcohol) and Bacterial Cellulose for the Solid-State Zinc-Air Batteries.

Dual cross-linked hydrogel electrolyte modified by nonionic surfactant for flexible and rechargeable zinc-air battery

Single-Ion-Conducting Hydrogel Electrolytes Based on Slide-Ring Pseudo-Polyrotaxane for Ultralong-Cycling Flexible Zinc-Ion Batteries

Construction of zwitterionic osmolyte-based hydrogel electrolytes towards stable zinc anode for durable aqueous zinc ion storage and integrated electronics

Water and Salt Concentration-Dependent Electrochemical Performance of Hydrogel Electrolytes in Zinc-Ion Batteries.

High-performance Zinc-Ion Hydrogel Electrolytes Based on Molecular-Level Hybridization of PVA with Polymer Quantum Dots

High Voltage, Toughness and Improved Interfacial Ion Deposition Through a Dual-Crosslinked and Self-Healable Hydrogel Electrolyte for Green Zinc-Ion Batteries

High-Conductivity and Ultrastretchable Self-Healing Hydrogels for Flexible Zinc-Ion Batteries

Dual-Network Structured Hydrogel Electrolytes Engaged Solid-State Rechargeable Zn-Air/Iodide Hybrid Batteries

A Fumed SiO2-Based Composite Hydrogel Polymer Electrolyte for Near-Neutral Zinc-Air Batteries