Abstract:Purpose: We recently demonstrated the feasibility of generating high current and high energy x-ray radiation using field emitted electrons from the carbon nanotubes (CNTs). The purpose of the present work is to develop a spatially distributed multiple beam x-ray array technology for stationary tomography imaging, including digital breast tomosynthesis, with the goal of increasing the spatial resolution and scanning speed. Method and Materials: CNT cathodes fabricated by patterned electrophoretic deposition were used as the field emission electron source for x-ray generation. Computer simulations and experimental measurements were carried out to design the electrostatic lens to focus the field emitted electrons to the predetermined area on the metal anode. Finite element analysis was performed to determine the anode heat load under the desired operation conditions. Spatially distributed x-ray source arrays with one- and two-dimensionally distributed focal spots were constructed using matrix addressable multi-pixel CNT cathode, and corresponding focusing and anode structures. By varying the extraction electrical field, x-ray radiation with programmable waveform was readily generated which can be gated with external triggers such as physiological signals with sub-microsecond response time. Dedicated control electronics were designed and manufactured to switch, scan, and regulate the x-ray beams. Results: Several spatially distributed field emission x-ray source arrays with different configurations and performance parameters have been fabricated and characterized for different imaging systems. Stable operation at anode voltage up to 160kVp has been achieved. Through improvement of the CNT cathode and electronic regulation beam-to-beam consistency in intensity and focal spot size has been demonstrated. A dedicated x-ray source array has been designed and fabricated for stationary digital breast tomosynthesis. The source comprises 31 individually controllable x-ray beams covering 30 degrees viewing angle, allowing collection of the all the projection images from different angles without any mechanical motion blur. It is operated up to 50KVp anode voltage at an effective focal size comparable to that of the traditional mammography tube. Tomosynthesis images of a breast phantom were obtained using the new source array and a flat-panel x-ray detector. Conclusion: The distributed field emission x-ray source array technology offers unique capabilities that are attractive for tomography imaging and potentially for radiotherapy. The flexibility in source configuration opens up new possibilities in system design. Conflict of Interest: Zhou is a board director of XinRay Systems which develops and commercializes the CNT X-Ray source technology.

X-Ray Characteristics of Four-Level Pulse Amplitude Modulation for X-Ray Communication Based on Carbon Nanotube Cold Cathode X-Ray Source

X-ray high frequency pulse emission characteristic and application of CNT cold cathode x-ray source cathode x-ray source

Emission characteristics of pulse CNT cold cathode X-ray source combined with channel electron multiplier

SIPAM-4 scheme improves bit error rate performance in MISO X-ray communication system

60 Gbit/s PAM-4 Wireless Transmission in the 310 GHz Band with Nonlinearity Tolerant Signal Processing

Design and performance test of pulse X-ray receiver based on LYSO-SiPM for X-ray communication

High-Speed Carbon Nanotube Photodetectors for 2 μm Communications

8×250 Gbit/s PAM4 Transmission over 1 Km Single Mode Fiber with an All-Silicon LAN WDM Transmitter.

50 M/187.5 Mbit/s Real-Time Underwater Wireless Optical Communication Based on Optical Superimposition

Design of a multi-carrier X-ray source for communication with energy modulation information

X-ray transmission effects in a high-density dynamic-dusty plasma environment

W-band PAM4 Signal Generation by a Modulator Driven by Binary Scheme with Different Driving Voltage

8.8 Gbps PAM-4 Visible Light Communication Link Using an External Modulator and a Neural Network Equalizer.

CNT Cathode based Multi-beam X-ray Source Technology

Optical PAM-4 Signal Generation Using a Silicon Mach-Zehnder Optical Modulator

Beyond 1.6 Tb/s Net Rate PAM Signal Transmission for Rack-Rack Optical Interconnects With Mode and Wavelength Division Multiplexing

300-Gbit/s/λ 8-Level Pulse-Amplitude-Modulation (PAM8) with a silicon microring modulator utilizing long short term memory regression and deep neural network classification

Design of 80-Gb/s PAM4 Wireline Receiver in 65-Nm CMOS Technology

Design Of 56 Gb/Spam4 Wire-Line Receiver With Ring Vco Based Cdr In A 65 Nm Cmos Technology

PAM-4 Signal Delivery in One Radio-over-fiber System

TU-E-110-02: Multibeam X-Ray Source Array Based on Carbon Nanotube Field Emission