Abstract:An effective lattice engineering method to simultaneously control the defect structure and the porosity of layered double hydroxides (LDHs) was developed by adjusting the elastic deformation and chemical interactions of the nanosheets during the restacking process. The enlargement of the intercalant size and the lowering of the charge density were effective in increasing the content of oxygen vacancies and enhancing the porosity of the stacked nanosheets via layer thinning. The defect-rich Co–Al-LDH–NO3– nanohybrid with a small stacking number exhibited excellent performance as an oxygen evolution electrocatalyst and supercapacitor electrode with a large specific capacitance of ∼2230 F g–1 at 1 A g–1, which is the largest capacitance of carbon-free LDH-based electrodes reported to date. Combined with the results of density functional theory calculations, the observed excellent correlations between the overpotential/capacitance and the defect content/stacking number highlight the importance of defect/stacking structures in optimizing the energy functionalities. This was attributed to enhanced orbital interactions with water/hydroxide at an increased number of defect sites. The present cost-effective lattice engineering process can therefore provide an economically feasible methodology to explore high-performance electrocatalyst/electrode materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c09217?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c09217</a>.Ionic radii and hydration shell radii of various anions (Table S1). EDS–elemental maps (Figure S1). FE-SEM images (Figure S2). Results of fitted Co K-edge EXAFS spectra (Table S2). Chemical compositions and oxygen vacancy contents (Table S3). Co 2p3/2 XPS data (Figure S3). Relative concentration of Co2+/Co3+ (Table S4). AFM images (Figure S4). Powder XRD data of restacked Co–Al-LDH NSs synthesized with the pH change, cation change, and temperature change (Figure S5). Stacking structures for restacked Co–Al-LDH NSs synthesized with the pH change, cation change, and temperature change (Table S5). FTs of Co K-edge EXAFS of Co–Al-LDH–NO3– synthesized with the pH change, cation change, and temperature change (Figure S6). Results of fitted Co K-edge EXAFS spectra of Co–Al-LDH–NO3– synthesized with the pH change, cation change, and temperature change (Table S6). Powder XRD, N2 adsorption–desorption isotherm, EPR, and FTs of Co K-edge EXAFS data of ion-exchanged Co–Al-LDH materials (Figure S7). Stacking structures, pore structures, and results of fitted Co K-edge EXAFS spectra for ion-exchanged Co–Al-LDH materials (Table S7). EPR and FTs of Co K-edge EXAFS data of bulk Co–Al-LDH, the exfoliated Co–Al-LDH NS, and restacked Co–Al-LDH NSs (Figure S8). Results of fitted Co K-edge EXAFS spectra for bulk Co–Al-LDH and the exfoliated Co–Al-LDH NS (Table S8). Powder XRD, N2 adsorption–desorption isotherm, EPR, and FTs of Co K-edge EXAFS data of Co–Al-LDH–DS– and Co–Al-LDH–NO3– (Figure S9). Stacking structures, pore structures, and results of fitted Co K-edge EXAFS spectra for Co–Al-LDH–DS– and Co–Al-LDH–NO3– (Table S9). EPR spectra of Co–Al-LDH–CO32– and Co–Al-LDH–NO3– (Figure S10). Lattice strains (Figure S11). LSV curves and stability tests of Co–Al-LDH–NO3– with/without Cl– (Figure S12). Powder XRD and EPR of restacked Ni–Fe-LDH NSs (Figure S13). Stacking structures for restacked Ni–Fe-LDH NSs (Table S10). Powder XRD data of Co–Al-LDH–NO3– after OER stability test (Figure S14). Specific capacitances of carbon-free LDH-based electrodes (Table S11). Fractions of the capacitive and diffusion-controlled contributions at various scan rates (Figure S15). Electrocatalyst/electrode functionalities of the carbonate-restacked Co–Al-LDH–CO32– (Figure S16). Correlation plots of overpotentials as several functions (Figure S17). Correlation plots of specific capacitances as several functions (Figure S18). DOS analyses (Figure S19). Defect formation energies (Figure S20). DFT-optimized structures (Figure S21). DFT-optimized lattice parameters of model-1 LDH and model-2 LDH (Table S12) (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c09217/suppl_file/nn0c09217_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enriched d ‐Band Holes Enabling Fast Oxygen Evolution Kinetics on Atomic‐Layered Defect‐Rich Lithium Cobalt Oxide Nanosheets

Off-Stoichiometry Induced Few-Nanometer Surface Layer for High-Performance Layered Cathode in Nonaqueous and Aqueous Electrolytes

Mitigating Evolution of Lattice Oxygen and Stabilizing Structure of Lithium-Rich Oxides by Fabricating Surface Oxygen Defects

Defects‐Induced In‐Plane Heterophase in Cobalt Oxide Nanosheets for Oxygen Evolution Reaction

Crucial Roles of Interfacial Coupling and Oxygen Defect in Multifunctional 2D Inorganic Nanosheets

Quinary Defect-Rich Ultrathin Bimetal Hydroxide Nanosheets for Water Oxidation

Electronic Structure Engineering of LiCoO2 Toward Enhanced Oxygen Electrocatalysis

Facile synthesis of defect-rich ultrathin NiCo-LDHs, NiMn-LDHs and NiCoMn-LDHs nanosheets on Ni foam for enhanced oxygen evolution reaction performance

In Situ Defect Engineering Route to Optimize the Cationic Redox Activity of Layered Double Hydroxide Nanosheet via Strong Electronic Coupling with Holey Substrate

Constructing uniform oxygen defect engineering on primary particle level for high-stability lithium-rich cathode materials

Lithiation-Induced Defect Engineering to Promote Oxygen Evolution Reaction

Regulation of 3d‐Transition Metal Interlayered Disorder by Appropriate Lithium Depletion for Li‐Rich Layered Oxide with Remarkably Enhanced Initial Coulombic Efficiency and Stability

Achieving ultra-low voltage fading in Co-free Li-rich layered oxides via effortless surface defect engineering

Enhancing the Performance of 2D Ni-Fe Layered Double Hydroxides by Cabbage-Inspired Carbon Conjunction for Oxygen Evolution Reactions

Scalable Synthesis of Holey Deficient 2D Co/NiO Single‐Crystal Na‐Nomeshes via Topological Transformation for Efficient Photocatalytic CO2 Reduction

Two-dimensional metal (oxy)hydroxide and oxide ultrathin nanosheets via liquid phase epitaxy

Lattice Engineering to Simultaneously Control the Defect/Stacking Structures of Layered Double Hydroxide Nanosheets to Optimize Their Energy Functionalities

Facile Synthesis of Ultrathin Co5(O9.48H8.52)NO3 Nanosheets and Their Electric-Field Assisted Transforming into Defect-Rich Co3O4/CoOOH Heterostructure for Efficient Oxygen Evolution

Molten metal-organic complex to synthesize versatile ultrathin non-layered oxides

Electrochemical Construction of Low-Crystalline CoOOH Nanosheets with Short-Range Ordered Grains to Improve Oxygen Evolution Activity

Oxygen Evolution Reaction: Holey 2D Nanosheets of Low‐Valent Manganese Oxides with an Excellent Oxygen Catalytic Activity and a High Functionality As a Catalyst for Li–O2 Batteries (adv. Funct. Mater. 17/2018)