Abstract:Reasonable design and feasible preparation of low-cost and stable oxygen reduction reaction (ORR) catalysts with excellent performance play a key role in the development of fuel cells and metal-air batteries. A 3D porous superimposed nanosheet catalyst composed of metal manganese covered with MnO2 nanofilms (P-NS-MnO2@Mn) was designed and synthesized by rotating disk electrodes (RDEs) through one-step electrodeposition. The catalyst contains no carbon material. Therefore, the oxidation and corrosion of the carbon material during use can be avoided, resulting in excellent stability. The structural and composition characterizations indicate that the nanosheets with sharp edges exist on the surface of the wall surrounding the macropore (diameter ∼ 5.07 μm) and they connect tightly. Both the nanosheets and the wall of the macropore are composed of metal manganese covered completely with MnO2 film with a thickness of less than 5 nm. The half-wave potential of the synthesized P-NS-MnO2@Mn catalyst is 0.86 V. Besides, the catalyst exhibits good stability with almost no decay after a 30 h chronoamperometric test. Finite element analysis (FEA) simulation reveals the high local electric field intensity surrounding the sharp edges of the nanosheets. Density functional theory (DFT) calculations reveal that the novel nanosheet structure composed of MnO2 nanofilms covered on the surface of the Mn matrix accelerates the electronic transfer of the MnO2 nanofilms during the ORR process. The high local electric field intensity near the sharp edge of the nanosheets effectively promotes the orbital hybridization and strengthens the adsorbing Mn-O bond between the active site Mn in the nanosheets and the intermediate OOH* during the ORR process. This study provides a new strategy for preparing transition metal oxide catalysts and a novel idea about the key factors affecting the catalytic activity of transition metal oxides for the ORR.

Oxygen Evolution Reaction: Holey 2D Nanosheets of Low‐Valent Manganese Oxides with an Excellent Oxygen Catalytic Activity and a High Functionality As a Catalyst for Li–O2 Batteries (adv. Funct. Mater. 17/2018)

High-Density NiMnFe Hydroxide Nanoparticle-Nanosheet Arrays for Industrial-Level Electrochemical Oxygen Evolution Reaction

Holey 2D Nanosheets of Low‐Valent Manganese Oxides with an Excellent Oxygen Catalytic Activity and a High Functionality As a Catalyst for Li–O2 Batteries

Multilayer Hybrid Nanosheet of Mesoporous Carbon−layered Metal Oxide As a Highly Efficient Electrocatalyst for Li−O2 Batteries

Α-Mno2 Nanowire-Anchored Highly Oxidized Cluster As a Catalyst for Li-O2 Batteries: Superior Electrocatalytic Activity and High Functionality.

Cobalt-doped MnO2 Ultrathin Nanosheets with Abundant Oxygen Vacancies Supported on Functionalized Carbon Nanofibers for Efficient Oxygen Evolution

Oxygen Vacancy Rich δ-MnO 2 Nanosheets Encapsulating Single Cobalt Atoms-Anchored Carbon Nanotubes for Efficient Oxygen Evolution

Functionalization of 2D materials for enhancing OER/ORR catalytic activity in Li–oxygen batteries

Oxygen Vacancy Rich Δ-Mno2 Nanosheets Encapsulating Single Cobalt Atoms-Anchored Carbon Nanotubes for Efficient Oxygen Evolution

Electrocatalysts: Synergistic Control of Structural Disorder and Surface Bonding Nature to Optimize the Functionality of Manganese Oxide as an Electrocatalyst and a Cathode for Li–O2 Batteries (Small 12/2020)

Two-Dimensional Mn3O4 Nanosheets with Dominant (101) Crystal Planes on Graphene As Efficient Oxygen Catalysts for Ultrahigh Capacity and Long-Life Li–O2 Batteries

Superlattice-Like Co-Doped Mn Oxide and NiFe Hydroxide Nanosheets toward an Energetic Oxygen Evolution Reaction

A Grafted Hybrid Nanosheet Array Architecture Enables Efficient Bifunctional Oxygen Catalytic Electrodes for Rechargeable Lithium−Oxygen Batteries

Carbon-Free, Binder-Free MnO2@Mn Catalyst for Oxygen Reduction Reaction.

Strongly Coupled MnO 2 Nanosheets/Silver Nanoparticles Hierarchical Spheres for Efficient Oxygen Reduction Reaction Electrocatalysis

Superior bifunctional oxygen electrocatalysts based on Co2MnO4 with mixed site occupancy, Mn-rich surfaces and twin defects

Preparation of nickel-manganese based bimetallic hydroxide nanosheets for enhanced electrocatalytic oxygen evolution reaction

Superior bifunctional oxygen electrocatalysts based on Co 2 MnO 4 with mixed site occupancy, Mn-rich surfaces and twin defects

Novel and promising electrocatalyst for oxygen evolution reaction based on MnFeCoNi high entropy alloy

Defect-induced deposition of manganese oxides on hierarchical carbon nanocages for high-performance lithium-oxygen batteries

Ultrathin Porous NiCo2O4 Nanosheets for Lithium–Oxygen Batteries: an Excellent Performance Deriving from an Enhanced Solution Mechanism