A novel gas removal method for the removal of C 2 H 2 in calcium carbide slag slurry by fine bubbles combined with air purging: performance, mechanism, and in situ bubble imaging analysis

Ziheng Meng,Ganyu Zhu,Huiquan Li,Shaopeng Li,Kun Yan,Yue Yang

DOI: https://doi.org/10.1016/j.seppur.2022.122987

IF: 8.6

2022-12-26

Separation and Purification Technology

Abstract:About 60% of carbon emissions in the cement industry come from the decomposition of limestone. As a key low-carbon technology of raw material substitution, calcium carbide slag (CCS, low-carbon calcareous material) can replace limestone to produce cement, desulfurizer, and other products, which can achieve carbon emission reduction and the upcycling of CCS. However, the release of residual C 2 H 2 in CCS brings safety and environmental risks, which seriously restricts the upcycling of CCS. In this study, a novel gas removal method of fine bubbles (FBs) degassing was proposed for the removal of C 2 H 2 in solid CCS particles, and an advanced in situ bubble imaging technology was used to investigate the performance and mechanism of C 2 H 2 removal. The results indicated that approximately 70% of C 2 H 2 (encapsulated C 2 H 2 ) in CCS was difficult to remove by drying or slurrying. Under the optimal condition, the C 2 H 2 removal efficiency was approximately 61.0%, and the amount of C 2 H 2 released from the CCS slurry decreased by 92.9%. In the process of FBs degassing, large CCS particles in the CCS slurry were broken up into fine particles via the erosion mechanism, thus promoting the reaction of the encapsulated calcium carbide with water to produce C 2 H 2 . The generated C 2 H 2 was dissolved in the slurry and could be quickly removed by FBs (<500 μm) with a fast mass transfer rate under the slight negative pressure. This work provides a novel gas removal method for effectively removing C 2 H 2 in CCS and avoiding security and environmental risks, provides technical support for the upcycling of CCS, and provides a reference for the separation of other similar multiphase systems (e.g., gas–liquid/gas–liquid–solid, oil-liquid/oil-liquid–solid).

engineering, chemical