Abstract:The performance of graphene can be influenced by its surface mophology, while the surface morphology of graphene is closely related to the substrate. The adsorption and peeling process of graphene on a corrugated surface can provide a theoretical basis for the functional preparation and transfer of graphene. In this work, the adhesion properties and peeling process of graphene on nanostructured substrate are investigated by using molecular dynamics (MD) simulation. As an effective tool of atomic collision theory, MD simulation can provide detailed information about the adsorption configuration and peeling properties of graphene on the nanostructure surface, making up for the deficiency of experiment. The results indicate that graphene can conformably coat on the surface, partially adhere to or remain flat on the top of the stepped substrate. We find that the continuous transition occurs in the adsorption configuration of graphene on the stepped substrate, but the repeated process appears in the transition from partial adherence to conformable coating. When graphene coats on the nanostructured substrate conformably, the adsorption energy can reach its peak value. The adsorption configuration of graphene can change from suspension to partial adhesion after the adsorption energy has exceeded 360 eV -2. It is also shown that the average peeling force fluctuates periodically when the absorption configuration of graphene is conformably coated or suspended on the stepped substrate. Two kinds of behaviors can be noticed in the peeling process. The graphene can directly slide over the bottom while it is fully coated on the surface. The graphene is separated directly from the corrugated surface while it suspends or partially adheres to the surface. If the absorption configuration of graphene is in the suspension state, the average peeling force appears to change drastically within a section of peeling distance and then decreases immediately below zero. Although the flexural stiffness of graphene can be overcome, the interfacial friction between graphene and the substrate is also an essential factor affecting the final adsorption configuration. In this paper, we propose a theoretical formula for the average peeling force according to the changes of size parameters on the nanostructured substrate. The theoretical formula is validated by the simulation results. In addition, with the increase of peeling angle, the average peeling force first increases and then becomes smaller. As a result, a larger average peeling force can be found when the graphene with Stone-Wales defect structure is peeled from the flat substrate. With the increase of double vacancy defect, the maximum peeling force decreases in a certain range, whereas it increases beyond this range. This work can provide a theoretical reference for exploring the peeling property and the adhesion mechanism of graphene on nanostructure surface.

Interfacial characterization in defective graphene/PET substrate structure through traction separation models: A molecular dynamics study

Sliding Behavior at the Graphene Oxide and Polyethylene Interface

A New Sequential Multiscale Model for Interface Failure of Graphene Reinforced Epoxy Nanocomposites Based on MD and SBFEM

Rate‐Dependent Decohesion Modes in Graphene‐Sandwiched Interfaces

Defect-activated self-assembly of multilayered graphene paper: A mechanically robust architecture with high strength

Decohesion of graphene from a uniaxially-stretched substrate: Failure analysis of a frictional adhesive interface

An Atomistic Level Investigation of the PFDTES-Graphene Interfacial Shear Strength and the Stick-Slip Mechanism

Study of the interaction energy at the composite interface between PDMS and functionalized Graphene using molecular dynamics simulations

Understanding the graphene-polymer interfacial mechanical behavior via coarse-grained modeling

Adhesion enhancement of conductive graphene/PI substrates through a vacuum plasma system

Enhancing the Adhesion of Graphene to Polymer Substrates by Controlled Defect Formation

Interfacial Mechanical Properties of Double-Layer Graphene with Consideration of the Effect of Stacking Mode

Degradation and Recovery of Graphene/polymer Interfaces under Cyclic Mechanical Loading

Wrinkling Instability of Graphene on Substrate-Supported Nanoparticles

Tuning the Interfacial Mechanical Behaviors of Monolayer Graphene/PMMA Nanocomposites.

Interfacial Damage of Bilayer Graphene under Shear Deformation: Theory, Experiment, and Simulation

Interface Adhesion Property Between Graphene Film and Surface of Nanometric Microstructure

Surface-Dependent Adhesion Properties of Graphene on Diamonds for the Fabrication of Nanodevices: A Molecular Dynamics Investigation

Effect of vacancy defects of graphene on the interfacial bonding and strengthening mechanism of graphene/Al composite

Mechanics of nanoscale wrinkling of graphene on a non-developable surface

Characterizing the Interfacial Behavior of 2D Materials: a Review