Abstract:Constructing stable co-continuous morphology of commercial immiscible polymer blends remains an ongoing challenge in terms of complex presynthetic routes, multiple parameter dependency, and intrinsic instability of phase morphology. Herein, we demonstrate a full biodegradable polymer blend, poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate), where hitherto inaccessible co-continuous with asymmetric compositions (70/30) can be obtained with the assistance of interfacial stereocomplex crystallites (i-SCs) through reactive blending. By taking full advantages of this unprecedented compatibilizer, nanostructured co-continuous blends with synergistically enhanced comprehensive performance are achieved. First, due to the "rigid" i-SC, co-continuous morphology is induced through a simple melt blending procedure; second, considerable augmentation of the crystallization rate of the PLA matrix is accomplished on account of the in situ formed nucleation agent (i.e., i-SC); third, a super toughened material with simultaneously enhanced tensile strength, ductility, and impact strength can be acquired, resulting from the i-SC-induced co-continuous morphology; and fourth, i-SC can function as a "rigid" supporting layer between phases even above 200 °C, resulting in significantly enhanced morphology stability in melt. The versatile, facile, and practical strategy offers an industrially relevant technique to fabricate super-robust and fully biobased polymer materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.macromol.0c02861?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.macromol.0c02861</a>.Molecular formula of reactive compatibilizers: SG, SG-g-PLLA, and SG-g-PDLA, and the corresponding grafted product through reactive blending: SG-g-PLLA-g-PBAT and SG-g-PDLA-g-PBAT; torque values versus time of PBAT/SG (50/6) blends and PLLA/SG (50/6) recorded during melt blending; 1H NMR spectra of SG, PDLA, PBAT, and grafted copolymer after sequential reactive blending and selective extraction of free PLAs and PBAT by acetonitrile and toluene, respectively; stress–strain curves of LSB-blend and DSB-blend specimens; digital picture of the LSB-blend and DSB-blend after impacted measurements; SEM images for impact-fractured surfaces of LSB-blends and DSB-blends; stress–strain curves and notch impact strength of the DSB-blend with the SC located in the PLA matrix and anchoring at the PLA-PBAT interface; mechanical parameters for the pristine blend, LSB-blend, and DSB-blend; and mechanical and thermo parameters for super-toughened PLA/biobased (70/30) polymer blends (<a class="ext-link" href="/doi/suppl/10.1021/acs.macromol.0c02861/suppl_file/ma0c02861_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Supersoft Polymer Melts in Binary Blends of Bottlebrush cis‐1,4‐Polyfarnesene and cis‐1,4‐Polyisoprene

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

Inorganic Bottlebrush and Comb Polymers as a Platform for Supersoft, Solvent-Free Elastomers

Solvent-free, supersoft and superelastic bottlebrush melts and networks

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Blends of polydimethylsiloxane-based polyurethane and poly (propylene glycol)-based polyurethane with co-continuous structures: morphology evolution, synergistic effects and application in strain sensors

Phase-Separation In Polymer Blends Comprising Copolymers .5. Polyisoprene/Poly(Isoprene-G-Styrene) Copolymer System

Polyolefin Blends with Selectively Crosslinked Disperse Phase Based on Silane-Modified Polyethylene

Dynamic Mechanical Properties of Self-Assembled Bottlebrush Polymer Networks

Synthesis and Micellization of Bottlebrush Poloxamers

Transparent sulfur-containing thermoplastic polyurethanes with polyether and polycarbonate soft segments

Biobased Terpene Derivatives: Stiff and Biocompatible Compounds to Tune Biodegradability and Properties of Poly(butylene succinate)

Stable Co-Continuous PLA/PBAT Blends Compatibilized by Interfacial Stereocomplex Crystallites: Toward Full Biodegradable Polymer Blends with Simultaneously Enhanced Mechanical Properties and Crystallization Rates

Amide-Containing Bottlebrushes via Continuous-Flow Photoiniferter Reversible Addition–Fragmentation Chain Transfer Polymerization: Micellization Behavior

Morphology, thermal behavior, rheological, and mechanical properties of polypropylene/polystyrene blends based on elongation flow

In situ synthesis of novel trans‐1, 4‐polyisoprene/isotactic polybutene reactor blends with multi‐component structure

Isostructural Softening of Vulcanized Nanocomposites

Thermal behavior of polymers and copolymers based on plant oils with differing saturated and monounsaturated content

Blends of thermoplastic polyurethane and polyether–polyimide: preparation and properties

Plasticization, Antiplasticization and Fragility in Blends of Polyvinyl Butyral and Polyethylene Glycol Dimethyl Ether