Abstract:To address the volume change-induced pulverization problem of tin-based anodes, a concept using hollow carbon nanoballs (HCNBs) as buffering supports is herein proposed. HCNBs with hollow interior, flexibility and graphitic crystallization are first prepared by a combined method of chemical vapor deposition (CVD) and template-synthesis using CH4 as the carbon source and CaCO3 as the conformal template. The ultrafine SnO2 nanoparticles are loaded onto the HCNBs (denoted as SnO2@HCNBs) via pyrolysis of tin(ii) 2-ethylhexanoate at 300 °C in air. On further annealing SnO2@HCNBs in Ar, SnO2 is partially reduced to SnOx by consuming a part of carbon of HCNBs as the reducing agent, and thus SnOx@HCNBs are obtained (note that SnOx represents a composite consisting of SnO2, SnO and Sn phases). When applied as anode materials for lithium ion batteries (LIBs), HCNBs deliver high reversible capacities of 841 mA h g-1 after 125 cycles at 200 mA g-1, and 726 mA h g-1 after 400 cycles even at 1000 mA g-1, while SnO2@HCNBs and SnOx@HCNBs exhibit discharge capacities of 1042 and 1299 mA h g-1 after 400 cycles at 200 mA g-1, respectively. Notably, all of them display gradually increased capacity with retention over 100% even after long-term cycling, which is attributed to the novel robust characteristic of the HCNBs as revealed by the ex situ TEM analysis. The flexible hollow HCNBs with high graphitic crystallization not only efficiently tolerate the volume changes of the Li-Sn alloying-dealloying but also facilitate the electrolyte/charge transfer owing to the hollow structure and high conductivity of the HCNBs.

A scalable ball milling strategy to endow SnS anode electrode with free volume property for enhanced electrochemical performance

A Universal Strategy to Fabricate Metal Sulfides@Carbon Fibers As Freestanding and Flexible Anodes for High-Performance Lithium/Sodium Storage

Research for SnS/C nanocomposite as lithium-ion battery anode materials

Ball milling of graphite/tin composite anode materials in a liquid medium

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

A General Strategy to Fabricate Carbon‐Coated 3D Porous Interconnected Metal Sulfides: Case Study of SnS/C Nanocomposite for High‐Performance Lithium and Sodium Ion Batteries

Mechanochemical synthesis and electrochemical properties of nanosized SnS as an anode material for lithium ion batteries

Preparation of high capacity Sn2S3/Sn3S4/FeS/Fe7S8 heterostructure composite lithium-ion battery anodes from reducing agents Fe and tin-based sulfides

Facile synthesis of high N-content carbon-confined amorphous SnS as anode material for lithium-ion batteries

Scalable Synthesis of SnS2/S-doped Graphene Composites for Superior Li/Na-ion Batteries

Arc-Discharge In Situ Synthesis of Dual-Carbonaceous-Layer-Coated SnS Nanoparticles with High Lithium-Ion Storage Capacity

Template Synthesis of Graphitic Hollow Carbon Nanoballs As Supports for SnOx Nanoparticles Towards Enhanced Lithium Storage Performance

Boosting the performance of half/full lithium-ion batteries by designing smart architecture anode of SnS2 nanosheet coating on NiCo2S4 hollow spheres

Metal Sulphides: A General Strategy to Fabricate Carbon‐Coated 3D Porous Interconnected Metal Sulfides: Case Study of SnS/C Nanocomposite for High‐Performance Lithium and Sodium Ion Batteries (adv. Sci. 12/2015)

SnS@C nanoparticles anchored on graphene oxide as high-performance anode materials for lithium-ion batteries

In Situ Synthesis of HCNFs@SnS2 Composite Via Solid-Phase Vulcanization Reaction for High-Performance Anode of Lithium-Ion Batteries

A spherical Sn–Fe3O4@graphite composite as a long-life and high-rate-capability anode for lithium ion batteries

Si/SnS 2 Nanocomposite for Lithium Ion Battery Anodes

Arc-discharge synthesis of dual-carbonaceous-layer-coated tin nanoparticles with tunable structures and high reversible lithium storage capacity

A Study on SnSb Alloy-Graphite Composites As Anode Materials for Lithium Ion Batteries

Uniformly Depositing Sn Onto MXene Nanosheets for Superior Lithium-Ion Storage