Abstract:Silty mudstone is highly susceptible to the influence of hot and humid environments, leading to the deterioration of its mechanical properties presenting a geohazard and even resulting in geological disasters. Accurately characterizing the effects of bedding and water-rock interaction on the mechanical behavior of silty mudstone is a crucial prerequisite for the protection and reinforcement of silty mudstone slopes. To this end, uniaxial compression tests and Brazilian splitting tests were conducted to examine the mechanical properties of bedded silty mudstone. Based on the test results, the effects of bedding angle and soaking time on mechanical properties such as tensile strength, uniaxial compressive strength and elastic modulus of bedded silty mudstone were revealed. The test results showed that the tensile strength increased exponentially with increasing bedding angle. The observed split failure patterns of bedded silty mudstone encompassed splitting-pulling damage, shear damage, and splitting damage. The uniaxial compressive strength of silty mudstone exhibited a U-shaped variation with an increase in bedding angle. The specimen with a bedding angle of 45° had the lowest uniaxial compressive strength at 7.64 MPa. Furthermore, the elastic modulus of silty mudstone was positively correlated with the bedding angle. The failure patterns of bedded silty mudstone under uniaxial compression included splitting-tension damage, shear-slip damage, and splitting-shear damage. The saturated tensile strength, uniaxial compressive strength and elastic modulus of bedded silty mudstone exhibited an exponential decrease with increasing soaking time. The test data confirmed the applicability of the Jaeger equation to the uniaxial compressive strength of bedded silty mudstone. Subsequently, a modified Hoek-Brown failure criterion was derived by combining fracture mechanics theory and test results and introducing a softening factor. The parameters A , D and m in the above failure criterion decreased exponentially with increasing soaking time and a empirical Hooke-Brown failure criterion considering the soaking time was established. Compared with previous theoretical models, this model is more adaptable to the actual engineering situation, which results in more accurate calculations.

Influence of Borehole Shear Test Wedge Spacing on Shear Strength Parameters of Intermediate Geomaterials

Enhancement of Constant Normal Stiffness Direct Shear Testing Protocols for Determining Geomechanical Properties of Fractures

Study Of Shear Strength Characteristics Of Simulation Rock Structural Planes Based On Multi-Size Direct Shear Tests

Field testing of shear strength of granite residual soils

A New Understanding of Punch-Through Shear Testing

Direct Shear Test on Coarse Gap-Graded Fill: Plate Opening Size and Its Effect on Measured Shear Strength

Water Retention Behavior and Shear Strength of Artificially Cemented Granite Residual Soil Subjected to Free Drying

Study on the Influence of Shear Indenter Parameters on the In Situ Shear Strength Test

Development of a shear strength model for a rock mass containing a complex fracture system based on direct shear tests: a case study

A Novel Method for Estimating the Undrained Shear Strength of Marine Soil Based on CPTU Tests

Study of shear properties and shear model of soil-rock mixture

Effects of Moisture and Stone Content on the Shear Strength Characteristics of Soil-Rock Mixture

Behavior of Shear Strength of Coarse Grained Materials Based on Large Scale Direct Shear Test (I)

Influences of Bedding Angle and Soaking Time on the Mechanical Behaviour of Silty Mudstone: Laboratory Testing and Theoretical Modelling

An experimental study of shear yield characteristics of structured granite residual soil

Case Study on Failure Mode of Medium-Weathered Mudstone Based on PLT-BVM Methods and Its Bearing Capacity

Study on the shear strength of soil–rock mixture by large scale direct shear test

Study on correlation between fractal characteristics and shear strength of bimsoils

Effect of bench size on the strength and deformation properties of interphase between benched bedrock and soil-rock mixtures

Determining the Shear Strength Properties of a Soil-geogrid Interface Using a Large-scale Direct Shear Test Apparatus

Analysis of the Shear Strength of a Soil-Geosynthetic Interface