Abstract:Impact properties of carbon/kevlar composites schematic diagram. In this article, carbon/kevlar hybrid composites were prepared using Vacuum Assisted Resin Infusion (VARI). The sandwich structure with plain carbon weave fabric as the core layer and plain kevlar weave fabric as the surface layer was selected as reinforcement and the solution of epoxy resin and curing agent was selected as matrix. The low velocity impact experiment and compression after impact (CAI) experiment were carried out on the samples at different hybrid ratio and different temperatures, and the mechanical response on the impact loads were analyzed respectively. The results show that the specimen can limit the delamination defect expansion of the surface kevlar fiber as the carbon fiber used as the core layer, which reduce the delamination defect area and improve the impact resistance of the sample. The toughness of the sample improves the brittle failure mode, that is, the sample still has a certain bearing capacity after the load exceeds the maximum strength, the sandwiched composites presents a positive hybrid effect. With the increase of temperature, the matrix was obviously softened, the macromolecular movement in the system was intensified, the three‐dimensional network macromolecular structure of the matrix and the fiber/matrix interface properties were damaged, and the mechanical properties showed an obvious downward trend. As far as the influences of hybrid ratio and temperature on impact behavior of composite are concerned, it lay a theoretical foundation for the industrial application of carbon/kevlar hybrid composites. Highlights The sandwiched structure was used to design the composites, which greatly improves the impact properties of the specimens. The impact properties and compression after impact properties at different hybrid ratios and different temperatures were studied. Based on the hybrid effect and temperature effect, the impact failure mechanism of the sample was analyzed.

Synthesis, processing and characterization of impact hardening gel (IHG) reinforced Kevlar fabric composites

Impact Resistance of Shear Thickening Fluid/kevlar Composite Treated with Shear-Stiffening Gel

Anti-impact Behavior of a Novel Soft Body Armor Based on Shear Thickening Gel (STG) Impregnated Kevlar Fabrics

Shock wave mitigation and impact resistance response of Kevlar fabric with novel shear-stiffening gel core

Intralayer Interfacial Sliding Effect on the Anti-Impact Performance of STF/Kevlar Composite Fabric

Study on impact properties of carbon/kevlar fiber hybrid composites

High Strain-Rate Dynamic Mechanical Properties of Kevlar Fabrics Impregnated with Shear Thickening Fluid

Low-Velocity Impact and Post-Impact Residual Flexural Properties of Kevlar/EP Three-Dimensional Angle-Interlock Composites

Experimental analysis of the impact protection properties for Kevlar® fabrics under different orientation layers and non-Newtonian fluid compositions

Conductive Shear Thickening Gel/kevlar Wearable Fabrics: A Flexible Body Armor with Mechano-Electric Coupling Ballistic Performance

Advanced functional safeguarding composites with enhanced anti-impact and excellent thermal properties

Rheological characterization and synergistic energy absorption under fluid–solid interaction of shear thickening gel/3D angle interlocking composites

A self-healing and energy-dissipating impact-hardening polymer based on a variety of reversible dynamic bonds

Study on dynamic and static tensile and puncture-resistant mechanical properties of impregnated STF multi-dimensional structure Kevlar fiber reinforced composites

A New Partially-Infused Fiber Reinforced Thermoplastic Composite for Improving Impact Resistance

Novel Kevlar fabric composite for multifunctional soft body armor

Experimental study on protective performance of ACF sandwich composites with different configurations in high-velocity impact

Impact-Protective Bicontinuous Hydrogel/Ultrahigh-Molecular Weight Polyethylene Fabric Composite with Multiscale Energy Dissipation Structures for Soft Body Armor

Anti-impact response of Kevlar sandwich structure with silly putty core

Strain Rate-Induced Phase Transitions in an Impact-Hardening Polymer Composite

Low-velocity impact and static behaviors of high-resilience thermal-bonding inter/intra-ply hybrid composites