Abstract:This article studies an event-triggered fixed-time trajectory tracking control problem of an n-joint manipulator system. Firstly, a fixed-time disturbance observer is proposed to reconstruct the total disturbance composed of external disturbances and model uncertainties, using the estimation as feedforward compensation to enhance the system robustness. Subsequently, based on the backstepping framework, a fixed-time controller with an event-triggering mechanism is designed for the manipulator to ensure the convergence of tracking errors to zero within a fixed time. Additionally, two event-triggering conditions are devised to reduce the transmission time of control input and the computation time of control output. Simultaneously, Zeno behavior is excluded through theoretical proof, validating the fixed-time stability of the closed-loop system. Finally, simulation verification is conducted on a two-joint manipulator, with results confirming the effectiveness of the control strategy.

What problem does this paper attempt to address?

### Problems the paper attempts to solve This paper aims to solve the fixed - time trajectory tracking control problem of multi - joint manipulator systems in the presence of external disturbances and model uncertainties. Specifically: 1. **Design of the disturbance observer**: In order to deal with the influence of the total disturbance (including external disturbances and model uncertainties) on the manipulator control system, the paper designs an observer that can accurately reconstruct the total disturbance within a fixed time. Different from previous works, this paper does not need to assume that the upper bound of the total disturbance is known or its time derivative converges, thus relaxing these restrictive assumptions. 2. **Introduction of the event - triggering mechanism**: By introducing the event - triggering mechanism, communication and computational resources are effectively saved. Specifically, within the backstepping framework, a fixed - time controller based on the event - triggering mechanism is designed, which significantly reduces the transmission time of control inputs and the computation time of control outputs. 3. **Combination of event - triggering and fixed - time control**: By combining the event - triggering mechanism and fixed - time control theory, the controller can fully utilize the advantages of these two methods. By choosing appropriate event - triggering parameters and control parameters, the manipulator can track the desired trajectory within a fixed time while saving communication resources. ### Main contributions 1. **Accurate disturbance observer**: An observer that can accurately reconstruct the total disturbance within a fixed time is designed and does not depend on the initial state of the system. In addition, the assumption that the upper bound of the total disturbance is known or its time derivative converges is relaxed. 2. **Application of the event - triggering mechanism**: By introducing the event - triggering mechanism, communication and computational resources are effectively saved. Under the backstepping framework, a fixed - time controller based on the event - triggering mechanism is designed, which significantly reduces the transmission time of control inputs and the computation time of control outputs. 3. **Combination of event - triggering and fixed - time control**: By combining the event - triggering mechanism and fixed - time control theory, the controller can fully utilize the advantages of these two methods. By choosing appropriate event - triggering parameters and control parameters, the manipulator can track the desired trajectory within a fixed time while saving communication resources. ### Simulation verification In order to verify the effectiveness of the proposed control method, the paper conducts simulation experiments on a two - joint manipulator with external disturbances and model uncertainties. The experimental results show that the designed control strategy can effectively realize the trajectory tracking of the manipulator, and all closed - loop signals have global fixed - time stability. ### Conclusion By designing a fixed - time disturbance observer and introducing an event - triggering mechanism, this paper successfully solves the fixed - time trajectory tracking control problem of multi - joint manipulator systems in the presence of external disturbances and model uncertainties. The proposed method not only improves the robustness and response speed of the system but also effectively saves communication and computational resources.

Distributed Event-Triggered Control for Manipulator with Fixed-Time Disturbance Observer

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

Disturbance‐observer‐based fault‐tolerant control of robotic manipulator: A fixed‐time adaptive approach

Event-Triggered Adaptive Control for Practically Finite-Time Position-Constrained Tracking of Space Robot Manipulators

A Novel Fast Fixed-Time Control for Robotic Manipulator Based on Disturbance Observer

Adaptive model-based dynamic event-triggered output feedback control of a robotic manipulator with disturbance

Fixed-time Event-Triggered Adaptive Control of Manipulator System with Input Deadzone and Model Uncertainty

Disturbance Observer–based Event-Triggered Tracking Control of Networked Robot Manipulator

Event-Based Nonsingular Fixed-Time Tracking Control of an Uncertain Manipulator System Subject to Full-State Static Constraints

Fixed-Time Tracking Control for Robotic Manipulators Based on Adding a Power Integrator Method

Tracking Control of Robotic Manipulators with Uncertain Kinematics and Dynamics

Discrete Nonsingular Terminal Sliding Mode Control for Trajectory Tracking of Space Manipulators with Mismatched Multiple Disturbances and Noisy Measurements

Fixed‐Time Sliding Mode Control for Robotic Manipulators Based on Disturbance Observer

Robotic Manipulator Control Based on Disturbance Observer: A High-Order Fully Actuated System Approach

Distributed Adaptive Gain-Varying Finite-Time Event-Triggered Control for Multiple Robot Manipulators with Disturbances

Disturbance Compensation Based Finite-Time Tracking Control Of Rigid Manipulator

Event-Triggered Bipartite Consensus Tracking and Vibration Control of Flexible Timoshenko Manipulators Under Time-Varying Actuator Faults

Composite trajectory tracking control for robot manipulator with active disturbance rejection

A Novel Composite Controller Design for Manipulator with Flexible Component under Time-varying Uncertainties and Disturbances

A Novel Disturbance Observer Based Fixed-Time Sliding Mode Control for Robotic Manipulators with Global Fast Convergence

Time-Synchronized Convergence Control for n-DOF Robotic Manipulators with System Uncertainties