Abstract:High Performance Polymers, Ahead of Print. High-temperature-resistant thermoplastics, e.g., Polyetheretherketone (PEEK) and Polyetherimide (PEI), exhibit much more superior material properties than conventional plastics. They are recently becoming favorable feedstock materials in Fused Filament Fabrication (FFF) 3D printing applications, which yields a low-cost and high-efficient approach providing complex parts and tooling. This paper fabricates the PEEK-PEI combined sandwich structures by properly alternating the fed material during FFF processes, aiming to combine the benefits of both materials. This is considered one of the first few attempts to prepare high-performance thermoplastics-based sandwich samples via the FFF method. The specimens are designed as three-layer and five-layer sandwiches (i.e., each "layer" contain a unique material). In addition, the printed samples are post-processed via a thermal annealing treatment. Experimental results show that the sandwich specimens exhibit higher surface quality than independently printed PEEK materials. The PEI material can be printed in 100% infill density in sandwich structures, while it can be rarely printed independently with infill densities exceeding 40%. Annealing may not enhance the mechanical properties of sandwich specimens while stabilizing their mechanical performances. Under the same PEEK/PEI volumetric ratio (i.e., 1:1), increasing the number of alternating stack layers improves the tensile strength of the sandwich specimens by up to 17%. The sandwich printing method is also cost-effective, such that the five-layer sandwich specimen provides competitive tensile performance as compared to the virgin PEEK material. At the same time, its cost is only ∼60% of all-PEEK specimens.

Fused deposition modeling of hierarchical porous polyetherimide assisted by an in-situ CO2 foaming technology

Structuring Metal-Organic Framework Materials into Hierarchically Porous Composites Through One-Pot Fabrication Strategy

Construction of Bionic Porous Polyetherimide Structure by an In Situ Foaming Fused Deposition Modeling Process

Bioinspired Large-Scale Aligned Porous Materials Assembled with Dual Temperature Gradients

Dimensional Accuracy Control and Compressive Property of Microcellular Polyetherimide Honeycomb Foams Manufactured by an In Situ Foaming Fused Deposition Modeling Technology

Enhanced interfacial adhesion and increased isotropy of 3D printed parts with microcellular structure fabricated via a micro‐extrusion CO2 foaming process

Fabrication of 3D-Printed Biodegradable Porous Scaffolds Combining Multi-Material Fused Deposition Modeling and Supercritical CO2 Techniques

Boosting solubility performance of supercritical CO 2 via ethanol toward fabrication of polyetherimide/carbon fiber composite foam with three‐dimensional geometry shape

Hierarchical cellular scaffolds fabricated via direct foam writing using gelled colloidal particle‐stabilized foams as the ink

Microextrusion Foaming of Polyetheretherketone Fiber: Mechanical and Thermal Insulation Properties

Porous polyetherimide fiber fabricated by a facile micro-extrusion foaming for high temperature thermal insulation

A novel printing strategy to fabricate polyetheretherketone (PEEK)-based composites via hollow filaments filled with multiple reinforcements

An Inorganic Water‐Glass‐Based Hydrogel for Processing Hierarchically Porous 3D Structures by Combined Robocasting and Direct Foaming

A “room-temperature” injection molding/particulate leaching approach for fabrication of biodegradable three-dimensional porous scaffolds

Combined multi-nozzle deposition and freeze casting process to superimpose two porous networks for hierarchical three-dimensional microenvironment.

Hierarchical porous materials made by stereolithographic printing of photo-curable emulsions

Facile Fabrication of Hierarchically Porous Carbonaceous Monoliths with Ordered Mesostructure Via an Organic Organic Self-Assembly

A Review of the Preparation of Porous Fibers and Porous Parts by a Novel Micro-Extrusion Foaming Technique

An experimental investigation on the tensile properties of PEEK-PEI sandwich structures prepared via fused filament fabrication

Interfacial performance and build orientation of 3D‐printed poly(ether‐ketone‐ketone) reinforced by continuous carbon fiber

In Situ Foam 3D Printing of Microcellular Structures Using Material Extrusion Additive Manufacturing.