Abstract:The multiseeding technique is a method to grow large-sized REBa2Cu3O7−δ (REBCO, where RE is a rare earth element) high temperature superconducting bulks. However, due to the existence of grain boundaries between seed crystals, the superconducting properties of bulks are not always better than those of single grain bulks. In order to improve the superconducting properties caused by grain boundaries, we introduced buffer layers with a diameter of 6 mm in the growth of GdBCO bulks. Using the modified top-seeded melt texture growth method (TSMG), that is, YBa2Cu3O7−δ (Y123) as the liquid phase source, two GdBCO superconducting bulks with buffer layers with a diameter of 25 mm and a thickness of 12 mm were successfully prepared. The seed crystal arrangement of two GdBCO bulks with a distance of 12 mm were (100/100) and (110/110), respectively. The trapped field of the GdBCO superconductor bulks exhibited two peaks. The maximum peaks of superconductor bulk SA (100/100) were 0.30 T and 0.23 T, and the maximum peaks of superconductor bulk SB (110/110) were 0.35 T and 0.29 T. The critical transition temperature remained between 94 K and 96 K, with superior superconducting properties. The maximum JC, self-field of SA appeared in specimen b5, which was 4.5 × 104 A/cm2. Compared with SA, the JC value of SB had obvious advantages in a low magnetic field, medium magnetic field and high magnetic field. The maximum JC, self-field value appeared in specimen b2, which was 4.65 × 104 A/cm2. At the same time, it showed an obvious second peak effect, which was attributed to Gd/Ba substitution. Liquid phase source Y123 increased the concentration of the Gd solute dissolved from Gd211 particles, reduced the size of Gd211 particles and optimized JC. For SA and SB under the joint action of the buffer and the Y123 liquid source, except for the contribution of Gd211 particles to be the magnetic flux pinning center with the improvement of JC, the pores also played a positive role in improving the local JC. More residual melts and impurity phases were observed in SA than in SB, which had a negative impact on the superconducting properties. Thus, SB exhibited a better trapped field and JC.

Improved Superconductivity and Structural Mechanism Analysis of Y0.55Gd0.45Ba2Cu3O7–x/SrTiO3/Y0.55Gd0.45Ba2Cu3O7–x Tri-layer

Improvement of Surface Morphology and Critical Current Density of YDy 0 . 2 Ba2Cu 3 . 3 O7−δ Thick Films by Inserted RE2O3 Thin Films

Fabrication And Analysis Of Tri-Layer Yba2cu3 O (7-Delta) Thick Films By Low-Fluorine Mod Method

Fabrication and Analysis of Tri-layer YBaCu Thick Films by Low-Fluorine MOD Method

Fabrication and Analysis of Tri-layer YBa 2 Cu 3 O 7− δ Thick Films by Low-Fluorine MOD Method

Artificial Multilayers of REBaCuO/YBaCuO and YBCO/CuO(Y2O3) for High-Performance Long Tapes of Coated Conductors Derived by Metal Organic Solution Deposition

Enhancing Superconductivity of Ultrathin YBa2Cu3O7-δ Films by Capping Non-Superconducting Oxides*

Enhancement of Pinning Role by Nonstoichiometry in YBa2Cu3O7−y Superconductors

Enhancing superconductivity of ultrathin YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-δ</sub> films by capping non-superconducting oxides*

A review of thickness-induced evolutions of microstructure and superconducting performance of REBa 2 Cu 3 O 7− δ coated conductor

A Review Of Thickness-Induced Evolutions Of Microstructure And Superconducting Performance Of Reba2cu3o7-Delta Coated Conductor

Thickness Effect of Gd2Zr2O7 Buffer Layer on Performance of YBa2Cu3O7−δ Coated Conductors

Flux Pinning Properties of Single-Grain Bulk GdBCO Superconductors Processed by Different Thicknesses of Y123 Liquid Source

Ag Doping Effects on Y0.5Gd0.5Ba2Cu3O7−δmultilayers Derived by Low-Fluorine Metalorganic Solution Deposition

Crucial role of oxygen-deficient LaMnO3-delta cap buffer layer in enhancement of current carrying capability of MOD-YBCO coated conductors

Epitaxial Growth and Characterization of Dual-Sided Y2O3 Buffer Layer for Superconducting Coated Conductors

Significant improvement of the critical current of MOD-derived YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-<i></i></sub> -coated conductors by post-annealing treatment

Enhanced Pinning Properties of the Bilayers of YDy 0.5 Ba 2 Cu 3 O 7− Δ by SrZrO 3 Nanoparticles Through Low Fluorine Metallorganic Solution Deposition

The Performance of the Two-Seeded GdBCO Superconductor Bulk with the Buffer by the Modified TSMG Method

Advance in Long-Length REBCO Coated Conductors Prepared by Reel-to-Reel Metalorganic Solution and Ion-Beam-Assisted Deposition

Drastic improvement of surface structure and current-carrying ability in YBa2Cu3O7 films by introducing multilayered structure