Abstract:The high surface area provided by the nanopores of ordered mesoporous silica thin films enables a wide range of electrochemical applications such as sensors, catalysis, energy storage and ion-selective membranes. Further improvements are possible by coating such thin films on large surface area electrodes with high aspect ratios (> 100) to increase the active surface area. Atomic layer deposition (ALD) is often preferred to deposit conformal thin film oxides on high aspect ratio structures. Such vapor-phase depositions are limited by the available surface reactive sites to deposit thin films of thickness ranging from sub-nanometer to few tens of nanometer. However, there is a tradeoff in terms of deposition time/cycles to achieve quality films especially when high aspect ratios (>100) substrates are introduced. Electrochemistry offers an alternative, versatile method to conformally coat layers on 3D electrode surfaces. The electrochemically assisted self-assembly (EASA) of mesoporous silica, utilizes electrochemical reactions to locally increase the pH near the electrode surface, which in turn catalyzes the silica gelation and surfactant self-assembly, thus causing the controlled growth of mesoporous silica thin films [1]. Recently, our group has shown that good quality mesoporous silica films with thickness between 20-2000 nm could be achieved by controlling the hydrodynamic layer in a rotating disc electrode setup [2]. Moreover, EASA of mesoporous silica offers meso-channels that are aligned perpendicular to the underlaying conductive substrate which is optimal for mass-transport. In this follow-up work, we demonstrate a reliable, electrochemically controlled, conformal deposition of mesoporous silica onto large surface area nanomesh electrodes with an aspect ratio close to 100. Nanomesh electrodes developed in our group at imec, is built up of a regularly spaced (50 nm), inter-connected network of vertical and horizontal nanowires of diameter ~40 nm. These electrodes offer an 80x area enhancement (80 cm 2 per geometric cm 2 ) while maintaining a porosity close to 75%. We show that, the extent of silica deposition over these nanomesh electrodes can be electrochemically controlled from conformal coatings (~10 nm thick) uniformly coating the whole nanomesh architecture to complete fill and overfill of the nanomesh electrodes (~4 μm thick). Furthermore, excellent mass-transport properties of various silica coated nanomesh electrodes has been demonstrated using a ruthenium hexaammine redox probe. Finally, the area enhancement offered by the silica coated Ni nanomesh is demonstrated using the characteristic accumulation of a positively charged [Ru(NH 3 ) 6 ] 3+ probe within the negatively charged silica nanochannels, which shows 55x increase for the amount of charge from the probe stored in the coated nanomesh, compared to a planar silica layer, consistent with the expected surface area enhancement of the 4 μm thick nanomesh electrodes. References [1] Walcarius Alain, et al. Nature materials 6.8 (2007): 602-608. [2] Vanheusden Genis, et al. Chemistry of Materials 33.17 (2021): 7075-7088. Figure 1

Construction of Mesoporous Aluminosilicate Thin Films on ITO Electrodes for Immobilizing a Cationic Ru(II) Water Oxidation Catalyst

Electrodeposited SiO2 film: a promising interlayer of a highly active Ti electrode for the oxygen evolution reaction

Newly design and synthesis of Ni–Ir–Ru-doped mesoporous silica open-frameworks for admirable electrochemical water-oxidation application

Control of the pore size distribution inside the RuO2 catalyst by using silica nanosphere particle for highly efficient water electrolysis

Ordered Mesoporous Nickel Sphere Arrays for Highly Efficient Electrocatalytic Water Oxidation

Immobilizing Bimetallic RuCo Nanoalloys on Few-Layered MXene as a Robust Bifunctional Electrocatalyst for Overall Water Splitting

Oxide Encapsulated Ruthenium Oxide Catalysts for Selective Oxygen Evolution in Unbuffered pH Neutral Seawater

Construction of Zn-doped RuO2 nanowires for efficient and stable water oxidation in acidic media

Construction of Efficient Ru@NiMoCu Porous Electrode for High Current Alkaline Water Electrolysis

Nickel-ruthenium Nanoalloy Encapsulated in Mesoporous Carbon As Active Electrocatalysts for Highly Efficient Overall Water Splitting in Alkaline Solution

Construction of iridium oxide nanoparticle modified indium tin oxide electrodes with polycarboxylic acids and pyrophosphoric acid and their application to water oxidation reactions

Constructing Dense CoRu-CoMoO4 Heterointerfaces with Electron Redistribution for Synergistically Boosted Alkaline Electrocatalytic Water Splitting

Dodecylamine‐assisted hydrothermal synthesis of carbon‐supported ultrafine IrRu Nanoparticles for oxygen evolution electrocatalysis and overall water splitting

Synthetic Tuning Stabilizes a High-Valence Ru Single Site for Efficient Electrolysis

Surface/Interface Engineering of Hierarchical MoO2/MoNi4@Ru/RuO2 Heterogeneous Nanosheet Arrays for Alkaline Water Electrolysis with Fast Kinetics

Conformal Electrodeposition of Mesoporous Silica over High Aspect Ratio (AR>100) Nanomesh Electrodes

Synthesis and Characterization of Alkyl-Imidazolium-Based Periodic Mesoporous Organosilicas: A Versatile Host for the Immobilization of Perruthenate (Ruo4-) in the Aerobic Oxidation of Alcohols

Mesoporous Ruthenium Oxide: A Heterogeneous Catalyst for Water Oxidation

Modulating Electronic Environment of Ru Nanoclusters via Local Charge Transfer for Accelerating Alkaline Water Electrolysis

Locking the lattice oxygen in RuO2 to stabilize highly active Ru sites in acidic water oxidation