Abstract:Recently, graphene has gained a lot of attention in the electronic industry due to its unique properties and has paved the way for realizing novel devices in the field of electronics. For the development of new device applications, it is necessary to grow large wafer-sized monolayer graphene samples. Among the methods to synthesize large graphene films, chemical vapor deposition (CVD) is one of the promising and common techniques. However, during the growth and transfer of the CVD graphene monolayer, defects such as wrinkles, cracks, and holes appear on the graphene surface. These defects can influence the electrical properties and it is of interest to know the quality of graphene samples non-destructively. Electrical impedance tomography (EIT) can be applied as an alternate method to determine conductivity distribution non-destructively. The EIT inverse problem of reconstructing conductivity is highly non-linear and is heavily dependent on measurement accuracy and modeling errors related to an accurate knowledge of electrode location, contact resistances, the exact outer boundary of the graphene wafer, etc. In practical situations, it is difficult to eliminate these modeling errors as complete knowledge of the electrode contact impedance and outer domain boundary is not fully available, and this leads to an undesirable solution. In this paper, a difference imaging approach is proposed to estimate the conductivity change of graphene with respect to the reference distribution from the data sets collected before and after the change. The estimated conductivity change can be used to locate the defects on the graphene surface caused due to the CVD transfer process or environment interaction. Numerical and experimental results with graphene sample of size 2.5 × 2.5 cm are performed to determine the change in conductivity distribution and the results show that the proposed difference imaging approach handles the modeling errors and estimates the conductivity distribution with good accuracy.

Rapid THz time-of-flight imaging on single layer graphene for conductivity assessment

Graphene-based Thin-Films for Flexible Applications Inspected by High-Resolution Terahertz Near-Field Inspection

Imaging Conductivity Changes in Monolayer Graphene Using Electrical Impedance Tomography

Non-Drude THz conductivity of graphene due to structural distortions

Imaging molecular adsorption and desorption dynamics on graphene using terahertz emission spectroscopy

High mobility graphene field effect transistors on flexible EVA/PET foils

Raman and Conductivity Analysis of Graphene for Biomedical Applications

Parafilm Enabled Rapid and Scalable Delamination/Integration of Graphene for High Performance Capacitive Touch Sensors

Confocal laser scanning microscopy: A tool for rapid optical characterization of 2D materials

Ultrafast Growth of Highly Conductive Graphene Films by a Single Subsecond Pulse of Microwave

Optical conductivity measurement of chemically-doped graphene via terahertz time-domain spectroscopy

Non-destructive electron microscopy imaging and analysis of biological samples with graphene coating

Seeing Through Muddy Water: Laser-Induced Graphene for Portable Tomography Imaging

Quality Control of Graphene Field-Effect Transistor Arrays Using Slit-Scanning Raman Microscopy

Ultrabroadband THz Conductivity of Gated Graphene In- and Out-of-equilibrium

Observation of a Transient Decrease in Terahertz Conductivity of Single-Layer Graphene Induced by Ultrafast Optical Excitation

High-Throughput Graphene Imaging on Arbitrary Substrates with Widefield Raman Spectroscopy

Case Studies of Electrical Characterisation of Graphene by Terahertz Time-Domain Spectroscopy

Rapid Large-Scale Characterization of CVD Graphene Layers on Glass Using Fluorescence Quenching Microscopy

Non-invasive Scanning Raman Spectroscopy and Tomography for Graphene Membrane Characterization

Experimental Demonstration of Ultrafast THz Modulation in a Graphene-Based Thin Film Absorber through Negative Photoinduced Conductivity