Abstract:In this study the Non-Linear Ultrasonic Sideband Peak Count-Index (SPC-I) technique is used as the foundation for a novel approach towards acoustic source localization (ASL) in orthotropic composite plates. The SPC-I based technique proposed here does not require the signal attenuation information or any knowledge on the time of arrival of the signal. It should be noted that since individual sensors can have varying sensitivities, the signal attenuation measured from the recorded signal amplitude is not very reliable. In addition, it is not necessary to have any prior knowledge of the mechanical properties of the composite plate material. All these are achievable by attaching 25 sensors that are well-scattered on the surface of the plate. The signals that are generated by an acoustic source are recorded by these 25 sensors. The recorded signals are then analyzed to derive the SPC-I value for each signal. The calculated SPC-I values are run through an optimization algorithm to predict the acoustic source location. Such localization is possible because the composite plate is inherently a non-linear material. Hence, as the signal travels longer distances through a composite plate, the recorded signal should show increasing level of distortion due to material non-linearity and dispersion. This phenomenon manifests itself primarily as a consequence of signal scattering and frequency modulation. Because of this, the phenomena of increasing distortion in the signal with increasing propagation distance can be exploited and utilized to predict the location of the acoustic source by solely utilizing the SPC-I values. This acoustic source localization technique is experimentally verified on a Carbon Fiber Reinforced (CFR) composite plate of dimension 500 mm x 500 mm with a thickness of 1 mm. The experimental results confirmed the feasibility of the proposed technique.

Research on continuous ultrasonic source localization of composite structures by frequency domain characteristics indexing

Efficient Localization of Low-Frequency Sound Source with Non-Synchronous Measurement at Coprime Positions by Alternating Direction Method of Multipliers.

Research on Ultrasonic C-scan Technique for Large Unsymmetric Composite Component

Acoustic Source Localization in CFRP Composite Plate Based on Wave Velocity-Direction Function Fitting

A Joint Acoustic Emission Source Localization Method for Composite Materials

A single frequency component-based re-estimated MUSIC algorithm for impact localization on complex composite structures

Minimum Squared Error Method Based on Modal Analysis for Acoustic Emission Source Location Using Microfiber Coupler Sensor

Leakage Source Localization Method for Aerospace Composite Structures Based on U-Array Wave Velocity-Compensated Beamforming

Acoustic source localization in composite plates using Sideband Peak Count – Index technique

Acoustic Source Localization in a Reverberant Environment Based on Sound Field Morphological Component Analysis and Alternating Direction Method of Multipliers

Simultaneous Measurement of Local Longitudinal and Transverse Wave Velocities, Attenuation, Density, and Thickness of Films by Using Point-Focus Ultrasonic Spectroscopy

Source Location Techniques In Plate-Like Structures Based On Fiber Coupler Sensors

A Gradient Vector Descent Strategy for Localizing Acoustic Emission Sources in Discontinuous Structures with a Hole

Applications of a nanocomposite-inspired in-situ broadband ultrasonic sensor to acousto-ultrasonics-based passive and active structural health monitoring

Adaptive Multi-Cone Spatial Constriction of the Search Space of a Wireless Sensing Network of Tri-Axial Velocity-Sensors to Mitigate Innumerable “Image Sources” in Air-Acoustic Source Localization

Rapid localization of acoustic source using sensor clusters in 3D homogeneous and heterogeneous structures

A Method to Locate Spatial Distribution of Scattering Centers from Ultrasonic Backscatter Signal

The Study of Joint Acoustic Holography Algorithms Based on Continuous Scanning

Numerical research on the focusing characteristics of steady state sound field in finite space by combining finite element and phase conjugation methods

Three-dimensional sound source localization system based on fiber optic sensor array with an adaptive algorithm

Acoustic Emission Localization on a Large Anisotropic Composite Plate