Abstract:Efficient removal of copper and cobalt ions from water using SX‐modified hydrogel. The concentration of harmful metal ions is growing globally, which raises the risk to both human and ecological health. The use of "adsorption" technique has been found to be very effective, for the removal of toxic metal ions. Among other things, hydrogels as an adsorbent work effectively for the removal of toxic metal ions and other aquatic pollutants. The newly designed potato starch‐xanthate (SX) based hydrogel (SX‐modified hydrogel) has been synthesized using a mixture of acrylamide (AAm) and acrylic acid (AA) monomers, with the help of free‐radical graft copolymerization technique. The synthesized SX‐modified hydrogel has been characterized by several analytical techniques, namely, UV–visible (UV–vis) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, gel permeation chromatography (GPC), thermogravimetric (TG) analysis, point of zero charge (ΔpHPZC) analysis, x‐ray diffraction (XRD) analysis, and scanning electron microscope (SEM) analysis. The main objective of the current work is to remove the Cu2+ and Co2+ ions from wastewater using SX‐modified hydrogel as well as to study the swelling and water retention properties of the SX‐modified hydrogel. The swelling ratio of SX‐modified hydrogel has been found to be 312.31, 374.01, and 410.20 g/g at optimum pH 10, temperature 35°C, time 675 min in gray wastewater, tap water, and distilled water, respectively. The maximum percentage removal of Cu2+ and Co2+ ions by SX‐modified hydrogel has been found as 97.7% and 94.2%, respectively, at optimum conditions. The Langmuir isotherm model fits best with the experimental data, with maximum adsorption capacity of 515.46 mg/g for Cu2+ and 483.09 mg/g for Co2+ ions, respectively. The kinetic studies suggest that the adsorption process is governed by the second order kinetic model with rate constant of 2.06 × 10−4 g/(mg min) for Cu2+ and 1.79 × 10−4 g/(mg min) for Co2+ ions, respectively. The negative ΔG values suggest the adsorption process is spontaneous in nature. In addition, the positive ΔH values support the adsorption process is endothermic in nature. The SX‐modified hydrogel showed a remarkable desorption efficiency with 96.7% for Cu2+ and 92.5% for Co2+ ions and reusability for four consecutive adsorption–desorption cycles. It can be concluded that the SX‐modified hydrogel has showed an effective, economical, easy, low energy consuming, and significant potential in the treatment of wastewater containing heavy metal ions.

Biofilm hydrogel derived from physical crosslinking (self-assembly) of xanthan gum and chitosan for removing Cd 2+ , Ni 2+ , and Cu 2+ from aqueous solution

A novel chitosan-based hydrogel microspheres for efficient heavy metal-ion adsorption

Synthesis of Eco-Friendly Biopolymer, Alginate-Chitosan Composite to Adsorb the Heavy Metals, Cd(II) and Pb(II) from Contaminated Effluents

pH-Responsive Alginate/Chitosan Gel Films: An Alternative for Removing Cadmium and Lead from Water

Synthesis of cellulose hydrogel for copper (II) ions adsorption

Functionalized Cyclodextrin/Carboxymethyl Cellulose Composite Hydrogel with Double Network Structure for Adsorption of Heavy Metal Ions in Wastewater

Removal of copper and cobalt ions from aqueous solutions using starch‐xanthate based novel smart hydrogel via adsorption technique: Swelling, adsorption isotherm, and kinetic study

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Experimental study of the removal of copper ions using hydrogels of xanthan, 2-acrylamido-2-methyl-1-propane sulfonic acid, montmorillonite: Kinetic and equilibrium study

Preparation of Chitosan/Calcium Alginate/Bentonite Composite Hydrogel and Its Heavy Metal Ions Adsorption Properties

Modification of chitosan/calcium alginate/Fe3O4 hydrogel microsphere for enhancement of Cu(II) adsorption

All-biomass cellulose/casein adsorbent fabricated via the "green solvent system" of ionic liquid for the efficient removal of Cu(II), Cd(II) and Pb(II)

Use of Chitosan–Iron Oxide Gels for the Removal of Cd2+ Ions from Aqueous Solutions

Efficient Removal of Copper Ion from Wastewater Using a Stable Chitosan Gel Material

In-house fabrication of macro-porous biopolymeric hydrogel and its deployment for adsorptive remediation of lead and cadmium from water matrices

Adsorption of Copper and Arsenic from Water Using a Semi-Interpenetrating Polymer Network Based on Alginate and Chitosan

Facile fabrication of high capacity citric acid cross-linked chitosan and carboxymethyl cellulose-based hydrogel for fast kinetics removal of Cu(II)

Novel Binary Blended Hydrogel Films (Chitosan-Vanillin Schiff Base/Locust Bean Gum and Fe(III), Cu(II) & Zn(II) Complexes): Synthesis, Characterization, Conductivity, and Antibacterial Activity

α-ketoglutaric acid modified chitosan/polyacrylamide semi-interpenetrating polymer network hydrogel for removal of heavy metal ions

Chitosan Modified Diatomite Cross-Linked with Sodium Alginate and Polyethyleneimine Composite Gel Particles for Efficient Removal of Copper and Lead Ions

Preparation of CTS/PAMAM/SA/Ca2+ hydrogel and its adsorption performance for heavy metal ions