Abstract:Efficient removal of copper and cobalt ions from water using SX‐modified hydrogel. The concentration of harmful metal ions is growing globally, which raises the risk to both human and ecological health. The use of "adsorption" technique has been found to be very effective, for the removal of toxic metal ions. Among other things, hydrogels as an adsorbent work effectively for the removal of toxic metal ions and other aquatic pollutants. The newly designed potato starch‐xanthate (SX) based hydrogel (SX‐modified hydrogel) has been synthesized using a mixture of acrylamide (AAm) and acrylic acid (AA) monomers, with the help of free‐radical graft copolymerization technique. The synthesized SX‐modified hydrogel has been characterized by several analytical techniques, namely, UV–visible (UV–vis) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, gel permeation chromatography (GPC), thermogravimetric (TG) analysis, point of zero charge (ΔpHPZC) analysis, x‐ray diffraction (XRD) analysis, and scanning electron microscope (SEM) analysis. The main objective of the current work is to remove the Cu2+ and Co2+ ions from wastewater using SX‐modified hydrogel as well as to study the swelling and water retention properties of the SX‐modified hydrogel. The swelling ratio of SX‐modified hydrogel has been found to be 312.31, 374.01, and 410.20 g/g at optimum pH 10, temperature 35°C, time 675 min in gray wastewater, tap water, and distilled water, respectively. The maximum percentage removal of Cu2+ and Co2+ ions by SX‐modified hydrogel has been found as 97.7% and 94.2%, respectively, at optimum conditions. The Langmuir isotherm model fits best with the experimental data, with maximum adsorption capacity of 515.46 mg/g for Cu2+ and 483.09 mg/g for Co2+ ions, respectively. The kinetic studies suggest that the adsorption process is governed by the second order kinetic model with rate constant of 2.06 × 10−4 g/(mg min) for Cu2+ and 1.79 × 10−4 g/(mg min) for Co2+ ions, respectively. The negative ΔG values suggest the adsorption process is spontaneous in nature. In addition, the positive ΔH values support the adsorption process is endothermic in nature. The SX‐modified hydrogel showed a remarkable desorption efficiency with 96.7% for Cu2+ and 92.5% for Co2+ ions and reusability for four consecutive adsorption–desorption cycles. It can be concluded that the SX‐modified hydrogel has showed an effective, economical, easy, low energy consuming, and significant potential in the treatment of wastewater containing heavy metal ions.

Experimental study of the removal of copper ions using hydrogels of xanthan, 2-acrylamido-2-methyl-1-propane sulfonic acid, montmorillonite: Kinetic and equilibrium study

Influence of Salt and Surfactant on Copper Removal by Xanthan Gum-g-Itaconic Acid/Bentonite Hydrogel Composite from Water Using Fractional Factorial Design

Chemically-Crosslinked Xylan/Graphene Oxide Composite Hydrogel for Copper Ions Removal

Superadsorbent Hydrogel Based on Lignin and Montmorillonite for Cu(II) Ions Removal from Aqueous Solution.

Adsorption of Cu(II) ion from aqueous solutions on hydrogel prepared from Konjac glucomannan

Removal of copper and cobalt ions from aqueous solutions using starch‐xanthate based novel smart hydrogel via adsorption technique: Swelling, adsorption isotherm, and kinetic study

Adsorption of Cu2+ and Ni2+ from Aqueous Solution by Arabinoxylan Hydrogel: Equilibrium, Kinetic, Competitive Adsorption

Preparation of Thermoresponsive Alginate/starch Ether Composite Hydrogel and Its Application to the Removal of Cu(II) from Aqueous Solution.

A Novel Hydrogel for Highly Efficient Adsorption of Cu(II): Synthesis, Characterization, and Mechanisms

Study on Adsorption Characteristic of Graft Copolymer of Sepiolite/xanthan Gum for Copper (II) Ion

Adsorption behavior and mechanism of Cu(II) by sodium alginate/carboxymethylcellulose/magnesium hydroxide (SC-MH) hydrogel

Efficient removal of copper ions and organic dyes using chitosan, pectin, and magnetic hydrogel composites: Structural characterization and adsorption mechanisms

Biofilm hydrogel derived from physical crosslinking (self-assembly) of xanthan gum and chitosan for removing Cd 2+ , Ni 2+ , and Cu 2+ from aqueous solution

Gelatin-Glutaradehyde-Poly(Vinyl Alcohol) Bioadsorbent: Synthesis, Characterization and Application for Copper(II) Ion Removal from Synthetic Aqueous Solution

Highly Effective Adsorption of Heavy Metal Ions from Aqueous Solutions by Macroporous Xylan-Rich Hemicelluloses-Based Hydrogel.

Modified Kaolin Hydrogel for Cu2+ Adsorption

Synthesis and characterization of guar gum xanthate derivative super adsorbent hydrogel for the capturing of heavy metal ions from wastewater

Adsorption of Hydrogels Based on Cellulose for Cu(II) and Ni(II): Behaviors and Mechanisms

Facile fabrication of high capacity citric acid cross-linked chitosan and carboxymethyl cellulose-based hydrogel for fast kinetics removal of Cu(II)

Synthesis and Characterization of Novel Magnetic Nano-Biocomposite Hydrogels Based on Starch-g-poly(acrylic acid) Reinforced by Cellulose Nanofibers for Cu2+ Ion Removal

Removal of copper ions from water using polysaccharide-constructed hydrogels