Abstract:Safety and high energy density have long restricted the large-scale practical application of lithium metal batteries because of the unbridled growth of lithium dendrites and the rapid deteriorating cycle performance of the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode. Herein, an additive of RbNO3 with multiple functions is proposed for dendrite-free NCM811 lithium metal batteries. Benefiting from the electrostatic shielding effect formed by Rb+ during the Li+ deposition process and the solvation effect of NO3– to regulate lithium deposition, a high Coulombic efficiency of 95.02% (compared with the low Coulombic efficiency of 89.37% in the blank electrolyte) is acquired in Li//Cu cells, and the uniform growth of the lithium metal deposition with a large strawberry-like morphology is achieved. Moreover, when a cathode of NCM811 matches with a lithium metal anode, an extraordinary capacity retention of 93.67% after 200 cycles with a high Coulombic efficiency of 99.7% in the electrolyte with the RbNO3 system (a capacity retention of 80.1% with a Coulombic efficiency of 98.0% for the blank electrolyte) is achieved at 1C. This work provides guidance for the development of high-efficiency additives with dual synergistic regulation effects of anions and cations for lithium metal batteries in the future.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14290.Li//Cu test with concentration gradient additives; EIS plots; linear sweep voltammetry (LSV) curves; the schematic diagram of an equivalent fitting circuit; MD simulations of the N(r) function; SEM image of deposition of the lithium metal; XPS results of the copper surface; capacity–voltage curve; comparison of the Coulombic efficiency in cycle performance; XRD patterns of the NCM811 electrode; the comparison of the atomic percentage for the elements of the NCM811 electrode; and the detailed values of resistance of cells (PDF)This article has not yet been cited by other publications.

Synergistic Effect of Bis(2,2,2-trifluoroethyl) Carbonate and Succinonitrile in Suppressing the Dissolution of Nickel for Performance Improvement of Nickel-Rich Lithium Metal Batteries

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

The Synergistic Effect of Lithium Bis(fluorosulfonyl)imide and Lithium Nitrate for High-Performance Lithium Metal Anode

Simultaneous modulation of cathode/anode and electrolyte interfaces via a nitrile additive for high-energy-density lithium-metal batteries

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Regulating the Electrode-Electrolyte Interfaces of Lithium-High Nickel Batteries via a Multifunctional Additive

Concerted Effect of Ion- and Electron-Conductive Additives on the Electrochemical and Thermal Performances of the LiNi0.8Co0.1Mn0.1O2 Cathode Material Synthesized by a Taylor-Flow Reactor for Lithium-Ion Batteries

Synchronously Stabilizing the Interphase of Cathode and Anode Enabling Lithium Metal Batteries via Multiple Electrolyte Additives

The Role of Zinc Triflate Additive for Improved Electrochemical Performance of Nickel-Rich Layered Oxide Lithium Battery Cathode via Suppression of Interfacial Parasitic Reactions.

Enhanced Cycling Performance of Ni-Rich Positive Electrodes (NMC) in Li-Ion Batteries by Reducing Electrolyte Free-Solvent Activity

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Tailored interface composition improves the integrity of electrode/electrolyte interphases for high-voltage Ni-rich lithium metal batteries in a sulfolane-based electrolyte

Multifunctional High-Efficiency Additive with Synergistic Anion and Cation Coordination for High-Performance LiNi0.8Co0.1Mn0.1O2 Lithium Metal Batteries.

High‐Energy LiNiO2 Li Metal Batteries Enabled by Hybrid Electrolyte Consisting of Ionic Liquid and Weakly Solvating Fluorinated Ether

Improving Cycling Stability of Ni‐Rich Cathode for Lithium‐Metal Batteries via Interphases Tunning

Enhancing chemomechanical stability and high-rate performance of nickel-rich cathodes for lithium-ion batteries through three-in-one modification

Double‐Salts Super Concentrated Carbonate Electrolyte Boosting Electrochemical Performance of Ni‐Rich LiNi0.90Co0.05Mn0.05O2 Lithium Metal Batteries

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Multifunctional High-Efficiency Additive with Synergistic Anion and Cation Coordination for High-Performance LiNi 0.8 Co 0.1 Mn 0.1 O 2 Lithium Metal Batteries