What problem does this paper attempt to address?

The problem that this paper attempts to solve is to achieve fine - tuning of acoustic resonance in nano - scale mechanical resonators. Specifically, acoustic cavities with high Q - values (high - quality factors) are very sensitive to environmental conditions and manufacturing errors, which causes their resonance frequencies to easily deviate from the predetermined values. This deviation will make the device operate within non - ideal working frequency bands, thus affecting performance. Therefore, an effective method is required to actively control the peak frequencies and bandwidths of these mechanical oscillators to compensate for the effects of environmental fluctuations and manufacturing errors and to improve the operating range. ### Main contributions of the paper 1. **Proposed a new acoustic resonance tuning method**: By mixing high - order Lorentz responses in the optomechanical system, fine - tuning of acoustic resonance was achieved. This method can adjust the bandwidth and peak frequency without changing the mechanical properties. 2. **Utilized weakly - coupled phonon - crystal acoustic cavities**: The researchers designed and fabricated three coupled phonon - crystal acoustic cavities. These cavities are weakly coupled together through a photonic - crystal structure, avoiding mode splitting. 3. **Achieved continuous adjustment of bandwidth and peak frequency**: By adjusting the power ratio and relative phase of the input pump light, the bandwidth and peak frequency of acoustic resonance can be continuously adjusted, and the adjustment range is comparable to the dissipation rate of the acoustic cavity. 4. **Extended to higher - order Lorentz responses**: The researchers further demonstrated how to enhance the tuning range by introducing more coupled acoustic cavities. In particular, in the four - coupled and five - coupled acoustic cavity systems, a larger frequency tuning range was achieved. ### Formula explanations - **Description of the acoustic field**: \[ B_S=\chi_2 e^{i\phi}+\chi_3 \] where \(\chi_2\) and \(\chi_3\) represent the second - order and third - order Lorentz responses respectively, which are defined as follows: \[ \chi_2 = \frac{1}{[(\Delta\Omega - J)^2+(\Gamma_0/2)^2][(\Delta\Omega + J)^2+(\Gamma_0/2)^2]} \] \[ \chi_3=\frac{1}{[(\Delta\Omega - J)^2+(\Gamma_0/2)^2][(\Delta\Omega)^2+(\Gamma_0/2)^2][(\Delta\Omega + J)^2+(\Gamma_0/2)^2]} \] \(\Delta\Omega\) is the offset from the acoustic resonance frequency, \(J\) is the coupling strength, \(\Gamma_0\) is the dissipation rate of the acoustic wave, and \(\phi\) is the relative phase between the two pump lights. - **Balanced input power**: \[ S_1=\frac{\Gamma_0}{2}\times P_1 \] \[ S_2 = J\times P_2 \] ### Experimental results - **Bandwidth tuning**: When only channel 1 is excited, the system exhibits a wide second - order response; when only channel 2 is excited, the system exhibits a narrow third - order response. By adjusting the power ratio of the input pump light, continuous adjustment of the bandwidth can be achieved. - **Peak - frequency tuning**: By coherently mixing the second - order and third - order Lorentz responses, the peak frequency can be continuously adjusted. Experimental results show that the maximum frequency offset can reach ±0.27\(\Gamma_0\). ### Conclusion This paper proposes an acoustic resonance tuning method based on the mixing of high - order Lorentz responses, which can achieve fine - tuning of bandwidth and peak frequency without changing the mechanical properties. This method has broad application prospects in environmental compensation, laser heating, and manufacturing - error correction.

Acoustic Resonance Tuning by High-Order Lorentzian Mixing

Tuning the Resonance Properties of 2D Carbon Nanotube Networks Towards a Mechanical Resonator

Quantum-inspired design of a tunable broadband high-Q acoustic resonator

Realization of dynamically controlled resonator pairs in nanomechanical arrays

Acoustic resonances in non-Hermitian open systems

Ultra-coherent nanomechanical resonators based on inverse design

Tunable Micro- and Nanomechanical Resonators

Beating ringdowns of near-degenerate mechanical resonances

Theoretical Insights into 1:2 and 1:3 Internal Resonance for Frequency Stabilization in Nonlinear Micromechanical Resonators

Analysis of Nonlinear Characteristic of Nanomechanical Resonators

Centimeter-scale nanomechanical resonators with low dissipation

Acoustic Bound States in the Continuum in Coupled Helmholtz Resonators

Ultra-tuning of nonlinear drumhead MEMS resonators by electro-thermoelastic buckling

Nonlinear tuning of microresonators for dynamic range enhancement

High-precision spectral tuning of micro and nanophotonic cavities by resonantly enhanced photoelectrochemical etching

Nanoscale imaging of super-high-frequency microelectromechanical resonators with femtometer sensitivity

Arbitrary Function Resonance Tuner of the Optical Microcavity with Sub-Mhz Resolution.

Controlling periodic Fano resonances of quantum acoustic waves with a giant atom coupled to microwave waveguide

Optoelectrical Nanomechanical Resonators Made from Multilayered Two-Dimensional Materials

Design of Cost-Effective Nanoacoustic Devices based on Mesoporous Thin Films

Single and coupled Helmholtz resonators for low frequency sound manipulation